Recommended Wedge for a Lippert Turning Point Pin Box

Question

Question:

I have curt turn point on newer fifth wheel. I need to know which wedge kit i need for draw-tite fifth wheel hitch?. 16,000 lb. Rated With sliding mechanism Not sure if the one provided fits?

asked by: Darin N

0

Expert Reply:

The Replacement Wedge Block for Lippert Turning Point Pin Box item # LC79UD you were looking at is universal and will work with your Draw-Tite/Reese 5th wheel hitch. This wedge comes with the necessary mounting hardware.

expert reply by: Jerred H

0

Answer 1

Yes, it will. The B&W Companion OEM 5th Wheel Hitch item #BWRVK3710 will work with the Replacement Wedge Block for Lippert Turning Point Pin Box item #LC79UD on a Reese Sidewinder. However, if you don't already have the Turning Point Wedge…

view full answer...

Answer 2

I have exactly what you need to use the Turning Point pin box with your Curt A16 5th wheel trailer hitch. It is custom wedge #C16992. Customers have reported that the custom wedges designed for the Sidewinder pin boxes (similar to the Turning Point)…

view full answer...

Answer 3

The Lippert Turning point pin box uses a universal wedge that's compatible with all 5th wheel hitches, so you'd just need the Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 11

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 12

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Recommended Wedge for a Lippert Turning Point Pin Box

Product Page this Question was Asked From

Continue Researching