Custom Wedge for Lippert Turning Point Pin Box and Curt A16 5th Wheel Hitch in 2018 Nissan Titan XD

Question

Question:

I tow a 5th wheel trailer with a 2018 Nissan Titan XD. Trailer has a Lippert Turning Point pin box and I have a Curt A16 hitch. I need a custom wedge to use the Turning Point with the Curt hitch. Can you help?

asked by: Henry

0

Expert Reply:

I have exactly what you need to use the Turning Point pin box with your Curt A16 5th wheel trailer hitch. It is custom wedge # C16992. Customers have reported that the custom wedges designed for the Sidewinder pin boxes (similar to the Turning Point) do in fact fit the Lippert Turning Point pin boxes. Bolt this custom wedge on the pin box instead of the universal one and you will be good to go!

expert reply by: Michael H

0

Jj D.

3/2/2020

I have a Reese 14k hitch, part number 30026. Looking at a trailer with the turning point pin box. Is there a wedge that will fit my hitch?Thanks

Chris R.

3/3/2020

Yep! The Custom Wedge # SWW-03 is specifically designed for your Reese 30026 hitch and works perfectly with the Lippert Turning Point Pin Box.

Helpful Links

Accessories-and-Parts/Reese/SWW-03.html

William F.

9/5/2020

I have a turning point by LCI on my 5th wheel Draw-tite 16k . My wife and I get very frustrated hooking up at times because you have to be spot on with the wedge for it to go in . Do you have a custom wedge that would make things easier.

Jon G.

9/8/2020

Which exact Draw-Tite 5th wheel hitch do you have? Depending on what hitch you have there may or may not be a custom wedge.

Answer 1

On the Reese Revolution and a B and W 5th wheel trailer hitch you will need to bolt the wedge, #SWW-06, so that the narrow end points towards the front of the Revolution and the recessed part is facing down. I have included a link to the installation…

view full answer...

Answer 2

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 3

If the B and W Companion hitch is the #BWRVK3600 which fits the OEM rail kit of a Ram truck it can be used with a pivoting pin box like the Turning Point but if the hitch attaches to a gooseneck hitch via a center post then it can not be used with it…

view full answer...

Answer 4

I checked the Lippert Turning Point manual and below attached the maintenance recommendations. No mention of needing to lube the hitch plate is listed so you really don't need to lube that area. If you insisted on doing so a graphite lube like…

view full answer...

Answer 5

I spoke with a Lippert tech and he stated you would be able to move it by hand once the locking bolts are removed. If you can not then you'll need to remove the pin box from the frame and then remove the castle nut on the top to remove the top…

view full answer...

Answer 6

It would be a good idea to use white lithium grease like #L11354 in the pucks of the Ford OEM/Reese pucks but it's not specified as a requirement. The grease would not cause movement/chucking to become noticeable or worse.

view full answer...

Answer 7

I can confirm for you that there is a difference between the #BWRVK3300 and the #BWRVK3305 with the construction of the base of the hitch, which is where you get the difference in capacities between the two hitches. The 3300 is only rated for…

view full answer...

Answer 8

For your 2020 Rockwood 5th Wheel, there aren't many options for an air ride pin box that is compatible to replace your current turning point pin box. I recommend Item #LC328492 which has an 18,000lb towing capacity and is the closest to your…

view full answer...

Answer 9

Yes, it will. The B&W Companion OEM 5th Wheel Hitch item #BWRVK3710 will work with the Replacement Wedge Block for Lippert Turning Point Pin Box item #LC79UD on a Reese Sidewinder. However, if you don't already have the Turning Point Wedge…

view full answer...

Answer 10

The Lippert Turning point pin box uses a universal wedge that's compatible with all 5th wheel hitches, so you'd just need the Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD.

view full answer...

Answer 11

The Replacement Wedge Block for Lippert Turning Point Pin Box item #LC79UD you were looking at is universal and will work with your Draw-Tite/Reese 5th wheel hitch. This wedge comes with the necessary mounting hardware.

view full answer...

Answer 12

For your 2021 Grand Design Reflection 320MKS it appears that you currently have a 1621 Pin Box #LC1191191. You can verify this by checking the bolt hole dimensions on your Reflection. The horizontal bolt holes will be spaced 7-7/8" apart on…

view full answer...