Recommended Electric Trailer Jack For A 14,000lb Dump Trailer
Updated 05/24/2023 | Published 05/22/2023 >
Products Featured in This Question
Question:
I have a 14 dump trailer with gmw 14000 what size electric jack do I need weight capacity?
asked by: Herb
Expert Reply:
The rule of thumb for determining tongue weight is to calculate 10-15% of the GVWR for the trailer, with yours being 14,000lbs we'd be looking at a tongue weight of roughly 1,400 - 2,100lbs. With a jack you can always go heavier though, and the heavier duty you go the easier it will be for the jack to lift the tongue of the trailer.
The etrailer Electric Jack w/ Footplate # EJ-3527-BBX you were looking at is rated for 3,500lbs, which is well over what you'll need, and is designed to be powered by the 7-way of the tow vehicle. If you'd prefer one that you can wire to your battery then you'll want part # EJ-3520-BBX instead.
Whichever jack you decide to go with I highly recommend using a cover like part # UF38-944020 to help protect the head of the jack from the elements and prolong its lifespan.
Product Page this Question was Asked From
Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jacks
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 25-1/8 Inch Lift
- Bolt-On
- 1 Jack
- RAM
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Shop: Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
- Q&A: 7-Way Extension for Towing Food Truck with 2003 Ford Expedition
- Search Results: 17~279
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Search Results: electric tongue jack
- Shop: Dexstar Dual Wheel with Offset - 16 x 6 Rim - 8 on 6.5
- Shop: Dexstar Dual Wheel with 5-1/2" Offset - 16" x 6" Rim - 8 on 6-1/2 - Gray
- Shop: Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-3/8" Lift - 7,000 lbs
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Search Results: 4 flat pigtail
- Search Results: 4 way flat
- Video: A Closer Look at the Ark Drop Down Corner RV Stabilizer Jacks
- Q&A: 5,000 lb Bulldog A-Frame Jack With Short Retracted Height
- Q&A: What Style of 7-Way Plug Does the Electric Jack w/ Footplate and 7-Way Plug Use
- Q&A: What is Bolt Pattern of Powered A-Frame Jack # EJ-3527-BBX
- Q&A: A-Frame Jack Recommendation For Keystone Hideout 24BHWE
- Search Results: brakes
- Search Results: trailer leaf springs
- Search Results: disc brakes
- Article: The Best Electric Trailer Jacks of 2025
- Q&A: Recommended Weight Distribution System w/ Sway Control for a Trailer w/a 1,050 lbs Tongue Weight
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



