How to Wire Curt Soft Trac I Trailer Breakaway Kit with Battery Charger

Question

Question:

I bought 52011 for my trailer and trailer wires are orange an black. The 52011 both wires are blue how do I hook it up.

asked by: Chad A

0

Expert Reply:

The Curt Soft Trac I Trailer Breakaway Kit with Battery Charger part # C52010 isn't polarity specific, meaning it does not matter which wire you attach to power or ground. In this case, one of the two blue wires goes to battery power and the other goes to the trailer brakes but it does not matter which is which.

expert reply by: Conner L

0

How to Wire Curt Soft Trac I Trailer Breakaway Kit with Battery Charger
(click to enlarge)

Answer 1

If the pin on the breakaway switch is pulled or broken then yes you should have 12 volts entering and exiting the switch as this is what will engage the brakes on the trailer. The breakaway switch on your trailer is a normally open circuit which…

view full answer...

Answer 2

The replacement pin and cable you need for your Bright Way breakaway switch part #3802348 is the part #3802350!

view full answer...

Answer 3

I have attached an image below for the Curt Soft Trac I Trailer Breakaway Kit with Battery Charger #C52040. This image is from the lid of the battery case and better help to show exactly what wires connect to each other. It does show the correct…

view full answer...

Answer 4

Since your trailer doesn't use standard colors for it's wiring for lighting and braking you are going to have to wire in the breakaway kit #C52042 by function instead of by color. I won't be able to tell you which color is which on your…

view full answer...

Answer 5

You are correct that the Red wire from the Charger for Curt Soft Trac I and II Trailer Breakaway Kits #C52025 is connected to the Battery, the White is connected to Ground, the Blue is connected to the Breakaway Switch. The Black wire that you are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

How to Wire Curt Soft Trac I Trailer Breakaway Kit with Battery Charger

Product Page this Question was Asked From

Continue Researching