Bike Rack That Fits Malone EcoLight Sport Trailer

Question

Question:

I have a Malone Ecosport trailer. Do you have bicycle mounts for this trailer?

asked by: Robert

0

Expert Reply:

I believe you were referencing the Malone EcoLight Sport Trailer # MAL53FR, and yes we do indeed have a bike rack that fits this trailer. What you need is the following:

- Malone Pilot Trailer Bike Rack # MPG2100

expert reply by: Kyle S

0

Answer 1

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

view full answer...

Answer 2

Hello Bill, thanks for reaching out. The Malone MPG481 Trailer Storage Trunk #MPG481 will fit the Malone EcoLight Sport Trailer #MAL53FR you ordered. As you observed, accessories on top of the crossbars will prevent the trunk from opening. With the…

view full answer...

Answer 3

The 78 inch Yakima Rack n Roll trailer #Y08107 is actually wider overall than its 66 inch counterpart, #Y08106. So it is not just the crossbars. Because the price difference between the 2 is minimal it would be more beneficial to just go with the 78…

view full answer...

Answer 4

The Yakima Rack and Roll Trailer #Y08107 was designed for the 78" bars and so to use the 66" Round CrossBars #Y00410 you'll need to swap out to the 66" Crossmembers #8880155 as well, otherwise the trailer will be too wide for the…

view full answer...

Answer 5

Hey Vadim, you can upgrade your Rack and Roll trailer to the longer bars with the part #Y08111 like you are wanting to without having to worry about changing the wiring at all. The current wiring of your trailer would work fine.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Bike Rack That Fits Malone EcoLight Sport Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching