Will Curt and etrailer Trailer Hitch Receivers Fit 2022 Hyundai Tucson Hybrid

Question

Question:

Will the hitches Curt 94wr or etrailer e38kr listed for fitting 2022 Tuscon, also fit the 2022 Tuscon Hybrid?

asked by: Bob

0

Expert Reply:

Both the # C94WR and the # e38KR will fit your 2022 Tucson Hybrid. The hitches are identical with the exception of the finish so I would let that be the deciding factor. The Curt has a glossy finish and the etrailer hitch has a matte black powder coat finish. Personally I prefer the matte black since that gives it an OEM look and does a better job hiding dirt and dings.

If you plan on towing, you will also want the # CU94FR for wiring. This will give you a 4-way to power your trailer's signal lights. For a ball mount, check out the etrailer Ball Mount Kit # 989900. This kit comes with two ball mounts, along with a 1-7/8" and 2" ball with a bag to store everything in.

I have attached some review and installation videos below for your reference.

expert reply by: Robin H

0

Answer 1

To add a hitch to your 2024 Kia Sportage, I recommend the etrailer item #e38KR. This hitch is custom fit and bolts to your Kia with included hardware. I really like the etrailer hitch item #e38KR because it installs behind your rear bumper and the…

view full answer...

Answer 2

The Curt trailer hitch is what you'll want to install on your 2023 Hyundai Tucson N Line: Curt Trailer Hitch Receiver - #C94WR So far (March 2023) this is the only trailer hitch confirmed to fit your N-Line model, but even though it's your…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Will Curt and etrailer Trailer Hitch Receivers Fit 2022 Hyundai Tucson Hybrid

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching