Recommended Flat Towing Set Up for a 2019 Chevy Colorado  

Question:

Expert Reply:

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos.

Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights item # RM-676

Roadmaster Direct-Connect Base Plate Kit item # RM-523182-5

Roadmaster Battery Disconnect with Switch item # RM-766

Demco SBS Stay-IN-Play DUO Supplemental Braking System item # SM99251

Roadmaster Stop Light Switch Kit item # RM-751472

You won't need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. The Nighhawk tow bar has the coiled cable and the connector already. You will only need the Hy-Power Diode Wiring Kit item # RM-152.

I recommend sticking with the Roadmaster set up for tow bar, base plate kit, and wiring. With the exception of their supplemental braking systems Roadmaster is the standard for flat towing equipment. If you do decide to make the change you will need the following parts:

etrailer SD Non-Binding Tow Bar item # e74ZR - This works with the Roadmaster Direct-Connect Base Plate item # RM-523182-5

You would need all the pieces of the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 if you switched over to the etrailer tow bar.

If you want to go with a Demco base plate kit you would need:

etrailer SD Non-Binding Tow Bar item # e34ZR

Demco Tabless Base Plate Kit item # DM9519319

Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

expert reply by: Jerred H

0