Overall Width and Mounting Hole Bolt Spacing For Curt Trailer Hitch Receiver # C14355

Question

Question:

What is the overall width of this hitch outside to outside of the side rails?

asked by: Bob T

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver # C14355 is going to be 35-1/2" wide. The more important measurement to look at is going to be the mounting bolt holes. I have included an image below with the mounting bolt hole spacing when measuring on center.

expert reply by: Bud M

1

Mounting Bolt Hole Separation For Curt # C14355
(click to enlarge)

Answer 1

I took a look at the owner's manual for the 2001 Ford F-150 5.4L 4WD Super Crew and the maximum trailer weight that can be towed with this vehicle is 8,300 lbs with or without a weight distribution hitch if you have an automatic transmission. It…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C14355 is a fit for your 1999 Ford F-150 Flareside.

view full answer...

Answer 3

The Curt Class IV 2 Inch Hitch #C14355 is listed to fit a 1997 to 2003 Ford F-150 and F-250 Light Duty. When the Super Duty line was released in 1999 the F-250 Light Duty became the 7700 package for the F-150 model. So the Curt hitch will fit your…

view full answer...

Answer 4

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" #C13900 will fit your 2001 Ford F-150 truck, though I have a better option I recommend considering, the Draw-Tite Max-Frame Trailer Hitch Receiver #75065. The reason I really like…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Overall Width and Mounting Hole Bolt Spacing For Curt Trailer Hitch Receiver # C14355

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching