Trailer Hitch that Fits 2019 Toyota Yaris Sedan

Question

Question:

I have 2019 Toyota Yaris SEDAN.All I see is videos for the hatchback version. i want to know if this hitch will fit it or If im just going to have to bring it somewhere to get it installed.

asked by: Rich Z

0

Expert Reply:

We have a hitch that fits your 2019 Toyota Yaris Sedan with the Curt # C11421 but the Draw Tite you mentioned does not fit.

expert reply by: Jameson C

0

Answer 1

Trailer hitch #24815 does not fit your 2016 Scion iA but you can use Curt trailer hitch #C11421. The other hitch fits older and different Scion models just not your iA. If you want to use the hitch for an accessory such as a bike rack or cargo…

view full answer...

Answer 2

Curt has indicated that the rear fascia and exhaust is different for the SE models. If you have a 3-door 2012 Toyota Yaris SE the Draw Tite hitch part #24911 is a fit and would work well.

view full answer...

Answer 3

The Curt 1-1/4-inch Class I trailer hitch, part #C11480, is a confirmed fit for the 2015 Toyota Yaris Hatchback as long as it is not the SE version. This hitch will bolt on without any drilling required using the hardware that is included with the…

view full answer...

Answer 4

The Curt hitch #C11480 that you referenced does indeed fit the 2015 through 2019 Toyota Yaris as long as you do not have the SE. If you do not have the SE, you are okay installing it on your car. Although it was admirable that your friend made the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Hitch that Fits 2019 Toyota Yaris Sedan

Products Featured in This Question

Continue Researching