Windshield Cover that Fits 1995 Ford F-150

Question

Question:

Does the 290-2405 fit the Ford XLT 150 pick up. It does not have a camper on it.. Thanks

asked by: Ted M

0

Expert Reply:

We have a windshield cover that fits your 1995 Ford F-150 with the etrailer part # 288-06603 but the part number you mentioned does not fit your truck.

expert reply by: Jameson C

0

Answer 1

For as many units of the #288-06603 as we've sold, not one customer has reported any sort of damage to their vehicle door's weatherstripping. So, it's safe to say that unless you plan on leaving the cover on for months and months at a…

view full answer...

Answer 2

We found that the etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover #e98899 fits better on larger trucks like your 2021 Ford E450. We compared it with a similarly sized windshield cover #288-06603, and it wasn't so much the size but more…

view full answer...

Answer 3

Yes, The etrailer Snoblock Snow and Ice Windshield Cover #288-06603 will work great as a sun shade. Since it sits on the outside of the windshield, it will essentially keep any sunlight from coming thru the windshield. Keeping your car cool, and…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the…

view full answer...

Answer 12

Hi Thomas, From what info I could find, your 2026 Alliance Avenue 30bh comes with a Lippert Rota-Flex pivoting pin box that uses the Lippert Rhino pin box bolt pattern. The B&W 5th Wheel to Gooseneck Pin Box part #BW23RV is what I'd suggest…

view full answer...

Windshield Cover that Fits 1995 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching