Do You Remove Coil Springs to Install Air Lift 1000 Air Helper Springs On 2013 Chevy Suburban

Question

Question:

Your live chat was not helpful in answering my question and the PDF file on the product page did not cover installation instructions Can you tell me if I need to remove the coil springs on a 2013 Suburban 2500 to install your Air Lift 1000 Air Helper Springs for Coil Springs - Rear Item # AL60769 Brooke answered the live chat, the file she gave me did not open and she ended the session without answering my question

asked by: Kevin D

0

Expert Reply:

The Air Lift 1000 Air Helper Springs for Coil Springs part # AL60769 which are a fit for a 2013 Chevrolet Suburban do not require the coil springs to be removed for installation. I will admit though, there are times were I thought it would be faster and easier to just remove the coil springs as these can sometimes be a bit tiresome to install but nonetheless, it's not required to remove the coil springs. That said, you will need to place a floor jack under the rear of the vehicle while working so you have enough space to slide the air bags in between the coils.

expert reply by: Conner L

0

Answer 1

Hey Jeanie, The reviews aren't false, the app that allows you to adjust your brake settings on the Curt Echo #C51180 has been having a lot of issues pairing to the phone. With you having the tow package you really should just get a dash mounted…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Do You Remove Coil Springs to Install Air Lift 1000 Air Helper Springs On 2013 Chevy Suburban

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching