Coupler Options for Lock N Roll Trailer End Connection

Question

Question:

How do I convert my ball coupler style utility trailer to a receiver style for this item to work?

asked by: Tom C

0

Expert Reply:

To utilize the Lock N Roll coupler system on your trailer you'll need one of the following styles:

- A-Frame # 336TS504
- Flat Plate # 336TS514
- 2" Channel # 336TS528
- 2-1/2" Channel # 336TS506
- 3" Channel # 336TS508

The part # 336TS520 you were looking at is only if you have a receiver style connection on your trailer, which is fairly rare. If you aren't sure what you have just shoot me a photo of your trailer coupler and I'll be more than happy to help you figure out the best coupler style for your trailer!

expert reply by: Jon G

0

Answer 1

Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll #336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the…

view full answer...

Answer 2

For an articulating coupler and hitch for your tear camper I recommend using the Lock 'N' Roll System. The Lock 'N' Roll has 3 axis of direction allowing it to move up and down, side to side, and rotate 360 degrees. It also has a more…

view full answer...

Answer 3

The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like you…

view full answer...

Answer 4

Yes, you can install the Lock N Roll Articulating Hitch #336VS503 on the Curt Channel Style Adjustable Ballmount #C45900. The holes on the Lock N Roll are 5/8" diameter and spaced every 2" on center. This will fit the Curt having the same…

view full answer...

Answer 5

I went out to measure the Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side #336VS501 and found the distance from the center of the hitch pin hole to the back of the latching mechanism is about 6", the length from the…

view full answer...

Answer 6

Yes, we carry the Lock N Roll Articulating Trailer Coupler for 2" Receivers in 3 different lengths. The #336TS510 you found is 9-3/4" from the hitch pin center hole to the center of the coupler head. We also have it in a 18-1/2" Length…

view full answer...

Answer 7

I had our warehouse measure the Lock N Roll Articulating Hitch for 2" Receivers - 4-1/2" Drop/Rise #336VS517 you were looking at, and from the center of the hitch pin hole to the center of the hole that the pin on the trailer side connector…

view full answer...

Answer 8

The closest thing that we have to what you are looking for is something like the Demco #Demco Trailer Coupler w/ 5-Position Adjustable Channel #DM6125-81 (which can come in a variety of options) which you can interchange with the Demco Lunette Ring…

view full answer...

Answer 9

The correct Lock N Roll hitch assembly is going to depend on the size of the channel the coupler of your trailer sits on. You need about a 5" drop, and the closest is going to be the 4-1/2" drop Lock N Roll Articulating Hitch for 2"…

view full answer...

Answer 10

There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the trailer…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Coupler Options for Lock N Roll Trailer End Connection

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching