Which Lock N Roll Coupler Fits On a 2005 Strarcraft RT10 Pop Up Camper?
Updated 06/16/2023 | Published 06/15/2023 >
Products Featured in This Question
Question:
Will this coupler fit on a 2005 Starcraft RT10? Seems to me like the latch and brackets for support poles would be an issue. Pictures attached. Is there another articulating coupler system that would work?
asked by: Daniel R
Expert Reply:
Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll # 336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the current coupler sits at where you see the welds. This will allow you to weld in a 2" # 336TS528, 2-1/2" # 336TS506 or 3" # 336TS508 channel style coupler. Do note these measurements are for the inside the coupler measurement so you will need to add 3/8" to each of these measurements to get the outer width.
I recommend getting the Lock N Roll Articulating Hitch w/ 5-Position Channel # 336VS503515 for your tow vehicle. This will allow you to best level your trailer and will work with vehicles of different heights should you switch vehicles or have this on different trailers of different heights.
Product Page this Question was Asked From
Lock N Roll Articulating Coupler - A-Frame - Trailer Side - 11K
- A-Frame Trailer Coupler
- Off Road Coupler
- 50-Degree Frame
- Weld-On
- 11000 lbs GTW
- Latch Plates
- 2-5/16 Inch Hole
- Standard Grade
- Lock N Roll
more information >
Continue Researching
- Shop: Lock N Roll Articulating Channel Tongue Trailer Coupler - 3" Channel - Trailer Side
- Shop: Replacement Pin for Lock N Roll Vehicle-Side Trailer Hitch Latching Plates
- Shop: Curt Hitch Clip for 1/2" or 5/8" Pin - Zinc Finish - Qty 1
- Shop: Hitch Pin Clip for 1/2" Diameter Hitch Pins - Qty 1
- Shop: Lock N Roll Articulating Coupler - A-Frame Coupler w/ Jack Hole - Bolt-On - Trailer Side - 11K
- Shop: Lock N Roll Articulating Coupler - A-Frame - Trailer Side - 11K
- Video: Review of Lock N Roll Straight Tongue Trailer Coupler - Standard Coupler - LR73VR
- Q&A: Choosing the Correct Rise/Drop for Lock N Roll Articulating Hitch
- Shop: Lock N Roll Articulating Hitch w/ 5-Position Channel - 2" Receivers - Vehicle Side - 11K
- Q&A: Is There an Articulating Coupler That Will Work for Jeeps
- Q&A: Can Lock N Roll Articulating Hitch be Used in Rise Position
- Q&A: Is There a Trailer Coupler Designed For Offroading
- Q&A: Are Safety Chains Needed with Lock N Roll Articulating Hitch
- Q&A: Lock N Roll 5-position for 1-1/4 Inch Receiver
- Q&A: Availability of Lock N Roll Ball Mount With 6" Rise for Towing Tear Trailer
- Search Results: lock n roll
- Search Results: coupler
- Shop: Roof Rack
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE23JV
- Video: Complete Breakdown of the Torflex Lift Kit
- Search Results: trailer suspension parts
- Search Results: trailer wheels
- Search Results: lock n roll straight tongue trailer coupler
- Search Results: trailer hitch lock
- Search Results: lp hose
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Video: What to Know About the Replacement U-Bolt Axle Mounting Hardware Kit
- Video: All About the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Video: Let’s Check Out the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Shop: Truck Topper




