Dimensions of the Lock N Roll Articulating Trailer Hitch

Updated 08/08/2019 | Published 08/07/2019

Products Featured in This Question

Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs

(150)

$390.07

Lock N Roll Articulating Coupler - A-Frame - Trailer Side - 11K

(16)

$266.58

Lock N Roll Articulating Channel Tongue Trailer Coupler - 2" Channel - Trailer Side

(88)

$225.02

Question:

What is the length of this item from the hitch pin hole to the back face of the latching mechanism and also the overall length measuring from hitch pin.

asked by: Virgil S

Expert Reply:

I went out to measure the Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side # 336VS501 and found the distance from the center of the hitch pin hole to the back of the latching mechanism is about 6", the length from the center of the hitch pin hole to the end of the receiver is about 11" and the overall length is approximately 13-3/4".

Like the title says this the vehicle side of the ball mount and will need a trailer side coupler such as the Lock N Roll Articulating Channel Tongue Trailer Coupler - 2" Channel - Trailer Side # 336TS528 or Lock N Roll Articulating Coupler - A-Frame - Trailer Side # 336TS504.

expert reply by: Kyle S