Brake Controller Plug Location for a 2005 Toyota Tundra SR5

Question

Question:

where exactly I can find this plug or connector ...do you have pics... ive been hours looking for this connector and I can not find it can you help me please 2005 toyota tundra sr5 4 doors 4.7 4x4

asked by: Aquiles

0

Expert Reply:

The factory connector on your 2005 Toyota Tundra should be located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. But sometimes it is behind the kick panel to the left of the emergency brake pedal. I have linked a video showing a typical installation for you with the harness located in the traditional place, not behind the kick panel.

If your truck did not come with a factory 7-Way trailer connector then the connector will not be there. In order to install a brake controller you will first need to add a 4-Way flat trailer connector, # 119178KIT, unless it already has a 4-Way flat. Then you would need to install 4 and 7-Way installation kit # ETBC7. I have included some links that explain the ETBC7 installation for you.

expert reply by: Michael H

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hey Dennis, welcome back. You are thinking about this the right way. On your 2025 Tundra 1794, you can remove the active spoiler itself and leave the motor/actuator plugged in and mounted. There are a few things to keep in mind though. First,…

view full answer...

Answer 4

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 5

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 6

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 7

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 8

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 9

Shawn, good question - the Firestone air bag kit #F59XV kit can still work on your lifted 2025 Tundra as long as the factory rear jounce bumpers are still in place. If your truck has a true 3" rear lift, you can use Firestone’s 3" lift…

view full answer...

Answer 10

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Brake Controller Plug Location for a 2005 Toyota Tundra SR5

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching