Pivot Bolt Size for Yakima DoubleDown Hitch Bike Rack

Question

Question:

Hello, A question for Replacement Hardware for Yakima Doubledown Hitch Mounted Bike Rack Item # Y8890206: What are the sizes for the PIVOT nut and bolt? Thanks!

asked by: Hoainhon C

0

Expert Reply:

The black bolt and nut from the Replacement Hardware Kit # Y8890206 that's used for the pivot function is a a 3/8-16 hex bolt. 3.25” long and then it pairs with a 3/8-16 Nylock nut.

I confirmed this with my contact at Yakima.

expert reply by: Jon G

0

Answer 1

The Yakima LockUp Hitch Lock and Cable Lock Item #Y07238 appear to be the same as its counterpart on the Yakima site SKU: #8007238. In regards to a red piece at the end of the lock the Yakima DeadLock Hitch Lock and Integrated Locking Cable has been…

view full answer...

Answer 2

Since most bike carrier manufacturers use proprietary threads for their bike carrier like the Doubledown, the dimensions are not freely acquired. We have the replacement hardware, part #Y8890176 you can use to secure the bike carrier to the trailer…

view full answer...

Answer 3

The Yakima LockUp Hitch Lock and Cable Lock - Same Key System (SKS) #Y07238 is the cable lock and hitch lock you are seeking. This comes with same key lock cores and keys. For your pin, you will want the Replacement Mounting Hardware for Yakima…

view full answer...

Answer 4

The shank of the Yakima Down Down 4 Rack has proprietary threads so it is only compatible with the Yakima locks. I see that you looked at the Yakima lock core part #Y07235 which attaches to the end of the threaded hitch bolt that came with the Double…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

We sure do Rob and congrats on the new SUV. To add a hitch to your 2026 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit for your Rogue and comes with all hardware necessary for installation. The crosstube mounts entirely…

view full answer...

Answer 11

Hello Noah, thanks for reaching out. You can absolutely still install a trailer hitch on a 2025 Nissan Rogue with the rear kick sensor. The problem is the hitch will limit the functionality of the sensor. In most cases the kick sensor will still work…

view full answer...

Answer 12

Drilling is not required, and you will not need to trim or cut any part of the bumper fascia on your 2023 Nissan Rogue to install either the etrailer or Curt trailer hitches that fit. The hitches that fit are the following part numbers: - etrailer…

view full answer...

Pivot Bolt Size for Yakima DoubleDown Hitch Bike Rack

Continue Researching