Dimensions Of The JR Products Double Roller Catches with Prongs for RV Cabinets # 37270235

Question

Question:

what are measurements of section with rollers Part # 37270235

asked by: TRUDY D

0

Expert Reply:

I pulled the Double Roller Catches with Prongs for RV Cabinets # 37270235 from the warehouse and drew up a little diagram with the measurements of the roller bracket and also attached the picture Michael made of the catch.

expert reply by: Kevin C

0

Measure_37270235_001
(click to enlarge)

37270235 Dimensions
(click to enlarge)

Answer 1

To replace your lost storage compartment keys you'll just need to know the brand and lock code to find the correct replacement key. Each lock typically has a 3-digit code representing what the lock code. For example, the Replacement Key for Bauer…

view full answer...

Answer 2

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 3

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 4

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Answer 5

Hey Joe! Internal sensors typically last longer, are shielded from the elements, and will get a slightly more accurate reading. They also provide protection against theft if that is a concern. The down side is you have to remove the tire to mount…

view full answer...

Answer 6

The standoff tab on the Brophy Rigid Mount Spare Tire Carrier part #BR56VR is about 5" so as long as the width of the tire does not exceed 10" (0 offset wheel) you should be able to mount the wheel either way. If the width of the tire…

view full answer...

Answer 7

Hey Steven. The measurements you provided are somewhat reasonable. However, I would double check the hub face measurements as the standard 3,500lb axles with 80" spring centers measures 95" from hub face to hub face. The 89" hub…

view full answer...

Answer 8

Yes, either the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-81 or the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-80 will work great as a…

view full answer...

Answer 9

You aren't restricted here the Replacement 17-rpm Lift Motor for Fan-Tastic Vent part #FVK6010-80 version will work out great for you as long as you reverse the wires when hooking it up. Here is a note about that from them. "If your fan is…

view full answer...

Answer 10

The replacement Replacement Motor with Mounting Plate for Kwikee Electric RV Steps part #LC379608 is what you need to replace the 10312040 motor of your Hurricane Kwikee steps.

view full answer...

Answer 11

Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with the…

view full answer...

Answer 12

Hey Jeff! The best option for a self-leveling sealant is definitely Dicor. This is probably the number one name in that space, and is compatible with EPDM, TPO, PVC, DiFlex II, and BriTEK roofing materials. There are a variety of colors available,…

view full answer...

Dimensions Of The JR Products Double Roller Catches with Prongs for RV Cabinets # 37270235

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching