Replacement Motor For Kwikee Steps With 10312040 Motor

Question

Question:

My 2001 hurricane step # is 10312040 m015wm.will your motor be a comparable part?

asked by: Robert J

1

Helpful Expert Reply:

The replacement Replacement Motor with Mounting Plate for Kwikee Electric RV Steps part # LC379608 is what you need to replace the 10312040 motor of your Hurricane Kwikee steps.

expert reply by: Heather A

1

Gordon D.

5/9/2020

Are you sure this is the right step motor for 2001 fleetwood southwind

Chris R.

5/12/2020

The motor Heather mentioned above is specific to the model number the customer mentioned reading. I'm not sure what assembly your Southwind is equipped with so I can't confirm that it's the right replacement. Are there any numbers printed on your existing motor or gear box?

Answer 1

Since you have a 2002 Eastwood Discovery with 32 Series Kwikee steps the correct replacement motor for you is part #LC379608. If you'd like to upgrade to the current style motor and control board then you can use part #LC379145 instead. Attached…

view full answer...

Answer 2

Hello Martin, Great question. The Aqua-Magic VI #TH37SE uses the same standard 2-bolt pattern and seal style as the Aqua Magic IV. So from a bolting-it-down standpoint, they’re compatible. The only thing you really need to double-check is the space…

view full answer...

Answer 3

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

view full answer...

Answer 4

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

view full answer...

Answer 5

This is definitely something that has been an issue for newer trucks like your 2022 Ram 2500. Pretty much every truck manufacturer started making their trucks sit a bit higher a few years ago which has really changed the game for 5th wheel towing. If…

view full answer...

Answer 6

The magnetic switch is normally an open circuit for Kwikee Steps which is the factory standard, but in your case it appears you need the closed circuit magnetic switch. I confirmed this with my contact at Lippert who makes Kwikee steps. The physical…

view full answer...

Answer 7

To replace the gear and motor on a Kwikiee Series 32 step you will need the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160 and the motor #LC379147.

view full answer...

Answer 8

The correct replacement motor for your LCI motor 366043 on your Kwikee steps is Lippert Components Kwikee Motor and Screws for New IMGL Step Item #LC379147.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Replacement Motor For Kwikee Steps With 10312040 Motor

Product Page this Question was Asked From

Continue Researching