What 3,500-Lb Axle Fits a Lightning Snowmobile Trailer With 80-Inch Spring Centers?
Updated 09/29/2026 | Published 09/27/2026 >
Products Featured in This Question
Question:
Looking for 3500lb axle with brakes for my lightning snowmobile trailer. The spring center measures 80inch and I believe the hub ends measures 89 inch. I have to pull the wheels off to make double sure. But does that sound right? And do you have them. In stock
asked by: Steven E
Expert Reply:
Hey Steven.
The measurements you provided are somewhat reasonable. However, I would double check the hub face measurements as the standard 3,500lb axles with 80" spring centers measures 95" from hub face to hub face. The 89" hub measurement axles normally have 74" spring centers. I've attached a photo that shows how to correctly take these measurements. If you can confirm the 95" hub face and 80" spring center, we have # e52SR that is a fit. If you confirm the measurements you took were correct then we unfortunately do not have an axle for you. I'd recommend checking with a local fabricator or ordering something from Dexter directly. Whenever you're able, confirm those measurements and I'll be happy to assist you further.
How many snowmobiles do you usually haul on the trailer?
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: carpet
- Search Results: rocker switch
- Search Results: boat carpet
- Search Results: emergency vehicle lights
- Search Results: starlink
- Search Results: starlink mount
- Search Results: amber
- Shop: Patriot Hitches 5-Way 3-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 30K - Black Accent
- Shop: SaltDogg Electric Tailgate Salt Spreader - 2" Hitch - 4 Cu Ft Hopper w/ Powered Auger
- Shop: SaltDogg Electric Salt Spreader - 2 Cu Yd Stainless Steel Hopper with Auger for Truck Beds
- Shop: Salt Spreader
- Shop: Vehicle Lights
- Shop: Z-TRAK O-Ring Tie-Down Anchors for E-Track Systems - Qty 4
- Shop: CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 12' Long x 11" Wide
- Shop: CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 6'
- Shop: Nerf Bars - Running Boards
- Shop: Trailer Wiring
- Q&A: Recommended 89" Hub Face Trailer Axle w/ Electric Brakes and a Hubs w/a 5 on 4-1/2 Lug Nut Pattern
- Q&A: Replacing Bent 3,500lb Axle In 2001 Nash 18FM Travel Trailer 6 Lug
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub and Drum Kit for a Lippert 3,500 lb Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Brake Assemblies and Hubs for 1960 Airstream Trailer
- Q&A: Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?
- Q&A: Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
- Q&A: Full Axle vs Spindle Replacement for 2012 Forest River Stealth Toy Hauler
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review

