Where Does Ground Wire of Curt 4-Way C56281 go on 2017 Nissan Pathfinder

Question

Question:

2017 Nissan Pathfinder SV...do you happen to have a better photo of where to connect the Curt wiring harness ground wire than whats shown in the installation video?

asked by: Charles M

0

Expert Reply:

There is not a better photo than the one I added here from the installation video (linked below) on a Nissan Pathfinder for the ground wire location of the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56281.

This is on the passenger side of a Pathfinder, right behind the rear bumper, where the # C56281 plugs in.

expert reply by: Kyle S

0

Ground Wire Location of Curt Wiring Harness C56281 on Nissan Pathfinder
(click to enlarge)

Answer 1

You will be able to keep your spare tire mounted under the vehicle following the installation of the etrailer #e73AR. The spare tire will need to be lowered or temporarily removed to install the hitch. Once the hitch is installed, you won't have…

view full answer...

Answer 2

The Tekonsha #118273 7-way trailer connector uses the same jumper harness and relays that are used by the Curt #C56281 so you can simply leave those in place and install the 7-way and harness provided with the #118273 and plug it into the factory…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Where Does Ground Wire of Curt 4-Way C56281 go on 2017 Nissan Pathfinder

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching