Will Spare Tire Fit With etrailer Hitch on 2020 Infiniti QX60
Updated 07/19/2023 | Published 07/18/2023 >
Products Featured in This Question
Question:
Thanks for asking my previous question Robin H. I prefer the hidden hitch etrailer offers for my 2020 QX60. I am concerned however if the spare tire will fit in the space after the installation of the e73AR. There is not much room from the spare tire to the bumper. I watched the video and noticed that the hidden bumper requires removal of the spare prior to install and the other ones you offer that have part of the bar exposed does not.
asked by: David B
Helpful Expert Reply:
You will be able to keep your spare tire mounted under the vehicle following the installation of the etrailer # e73AR. The spare tire will need to be lowered or temporarily removed to install the hitch. Once the hitch is installed, you won't have any issues putting it back into place. The only exception would be if you added some kind of aftermarket spare with an oversized tire.
Temporary removal or lowering of the spare is very common for hitch installation. The reason you don't see that on the # 76031 is because the cross tube sits below everything. That also means a loss of clearance and you have to look at that cross tube hanging down at the back. With the concealed cross tube you have to get the tire out of the way to get the hitch into position because it sits up behind the fascia.
I have attached a picture below which shows the spare reinstalled with the hitch in place. This is the Curt # C13126 hitch but the design and installation are identical.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Q&A: Will a Trailer Hitch Fit a 2018 Infiniti QX60 with Backup Sensors
- Q&A: Best Trailer Hitch, Cargo Carrier and Cargo Bag for 2018 Infiniti QX60
- Shop: Grille
- Shop: Towing Mirrors
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 7.5K GTW, 750 lbs TW
- Shop: CIPA Universal Towing Mirrors - Clip On - Qty 2
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Step-By-Step Installation Tutorial for the Curt Trailer Hitch Receiver on a 2015 Infiniti QX60
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Infiniti QX60
- Video: DIY 2014 Infiniti QX60 Installation for the Draw-Tite Max-Frame Trailer Hitch Receiver
- Video: How to Install: Curt Trailer Hitch Receiver on your 2019 Infiniti QX60
- Shop: Trunk Bike Rack
- Search Results: trailer hitch receiver
- Search Results: trailer hitch
- Q&A: Does Draw Tite Hitch 76031 Fit 2017 Infiniti QX60 And Interfere with Backup Camera
- Video: 2019 Infiniti QX60 Draw-Tite Max-Frame Trailer Hitch Receiver: Complete Installation
- Search Results: nylon brush 814092
- Shop: Roof Rack
- Video: Installation Guide for the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2015 Infiniti QX60
- Video: Top Trailer Hitches For Your 2023 Honda CR-V
- Q&A: Where Does Ground Wire of Curt 4-Way C56281 go on 2017 Nissan Pathfinder
- Q&A: Upgrading Existing 4-Pole Trailer Connector on 2017 Nissan Pathfinder to 7-Way
- Search Results: tow hitch
- Article: Rust Prevention

