bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 4000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2004 Lincoln LS
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13126
In Stock
$209.76
Retail:$334.95
You Save: $125.19
Trailer Hitch
Not Confirmed to Fit

2004 Lincoln LS

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use, and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13126 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (180)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13126

  • 2 Inch Hitch
  • Class III
  • 4000 lbs GTW
  • Concealed Cross Tube
  • 600 lbs TW
  • CURT
  • For Towing
  • 5000 lbs WD GTW
  • 600 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13126 CURT Class 3 Trailer Hitch Receiver

Installation Details C13126 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

194 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:



by:



by:



by:



by:



by:



by:



by:

Josh has been great to work with !!!



by:

Easy install and fits perfectly. Great product and very low price. My third positive experience with retailer.



by:

My husband will install it, he just doesn't know that yet!!



by:

Great site, lots of options, pricing seems pretty fair. Quick shipping!



by:

Service at etrailer was great & the hitch has worked perfectly.



by:

Follow the great video that is available thru etrailer website and you will not have any install issues..purchase the wiring kit and bracket and the install will go as planned. The products are built to last and fit is perfect..
READ AND FOLLOW THE INSTRUCTIONS before install...



by:

Product was installed in accordance with the video provided at your website, which is extremely helpful. I used the bolts from the removal of the tow bracket to help chase the rust out of the mounting holes and used plenty of liquid wrench and took it really slow which added extra time to your recommended install time for a DIY'er.



by:
2013 Infiniti JX35

Great product, easy to install. This is my second hitch with this company. I am very satisfied. Thank you.



by:
2016 Infiniti QX60

I purchased and installed the Curt class lll hitch and 4 pin wiring harness on my 2016 Infiniti QX60. Installation was easy and went smoothly, thanks to the Etrailer video’s. There were no surprises and I am extremely happy with the product, installation process and the exceptional customer service Etrailer provides. Ordering was easy, I received it literally the next day and customer service followed up to make sure I had everything I needed. Would highly recommend Etrailer.

Doug B. profile picture

Doug B.

7/30/2019

Great, no problems! I have recommended etrailer several times to family and friends considering purchasing a hitch.



by:
2020 Infiniti QX60

This is a perfect hitch for my needs on my 2020 Infiniti QX60. I’m just using it to carry two bikes only not pulling anything with it. Installation was simple I did modify the metal hanger that the rear bumper facia connects to using the pushpin.
It’s a real clean installation, looks like it came from the factory. Very glad I bought this and installed it myself. The dealership wanted $450.00 for the hitch and installation, wasn’t going to happen.
etrailer thanks for all the videos on the installation on the QX60, they were extremely helpful. etrailer Rocks!

Bill S. profile picture

Bill S.

4/11/2021

The hitch I purchased and installed is still working out perfectly for using it for carrying my bike carrier.



by:

Easy transaction, Very fast shipping.r>
Thanks



by:
2017 Infiniti QX60

The definition of perfection: a perfect piece with very simple installation. The best.

Brooke M. profile picture
Etrailer Expert

Brooke M.

7/1/2025

Man, maybe Curt needs to hire you for marketing/writing, haha! That sounds almost poetic! So happy you are happy with the hitch. Are you about to go on a trail in the photo?



by:

Shipping was immediate. Installation was just as easy as advertised. A 74 year old and a 75 year old got it done in less than an hour. The hitch will be used to pull my fishing boat, keeping he good times rolling.

Elton profile picture

Elton

3/2/2021

Performs perfectly. Pulling the boat, you don’t even know it’s back there. If you’re looking for me, try the lake.



by:
Infiniti QX60

Very glad and happy I got this hitch. Looks great and easy to get to for placing bike rack.

Bob G. profile picture

Bob G.

7/22/2017

Use it all the time. Needed a new tighting handle though. They should ne metal not plastic.



by:
2013 Infiniti JX35

I got this to go on our Infiniti JX35, and it works great. It took less than an hour to install, which I did on my own when it was cold out! I went with this hitch as wanted minimal parts showing, and this one fits the bill. The small amount of trimming that was required was easy, I just used a sharp utility knife and took my time. When you install this, do the exhaust side first, learn from my struggles!
Works great and has a clean install look.

Will C. profile picture

Will C.

1/29/2017

Everything is great, use it with a bike rack and a luggage rack!



by:
2015 Nissan Pathfinder

Excellent trailer hitch ,easy to install also suply Nut and Bolt plus ring .

My friend mechanical shop and he told me you really by towing very good staff ,where you got it ?

I said to him look the sticker at the bar ,oh he said ,you smart by this extra spend time but saving big buck .

Saving money cost less than $ xxx ,but if you buy the car with towing package extra probably $ 1000 so I suggest do the same what I did .
And also behind you car people stop or parking not to close you car ,protect bumper from scratch or damage .
Thank you to all of you and Merry Christmas 2016 and the Best New year come 2017 .



by:
2019 Infiniti QX60

Finally got around to mounting the hitch to my Infiniti QX60. Was unable to remount the fascia trim brackets that had to be removed for installation because once the hitch bolts were tightened down, the central hitch part actually presses upwards into the fascia trim and warps the natural flow of the fascia trim a bit ( I did indeed make the cuts to the fascia per the directions). Not a big deal as the pressure stiffens the fascia trim and there is no fluttering. However, I will get a couple pieces of aluminum and make some new brackets to remove any possibility of movement. The attached photo shows the hitch pressing the fascia up a bit and the outer edges of the fascia being pushed down. If that upward pressure was not there, I would have given this hitch 5 stars.



by:

Fitment was very good only complaint would be the lack of mounting hardware with the wire harness


25
194
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Recommended Trailer Hitch for a 2020 Infiniti QX60
    Yes, the Curt Trailer Hitch Receiver part # C13126 is a confirmed fit for a 2020 Infiniti QX60 and it offers a bolt-on installation. Furthermore, the Curt hitch has a hidden design which means you only see the receiver tube so you don't have to look at a bulky cross tube at the rear of your vehicle. In regards to installation, this should only take around an hour or so and you don't really need any special tools either so you can do this at home by yourself. If you will be towing then...
    view full answer...
    Image 1 for
  • Will a Trailer Hitch Fit a 2018 Infiniti QX60 with Backup Sensors
    I reached out to Curt, who makes the Curt Trailer Hitch Receiver part # C13126 for your 2018 Infiniti QX60 (excluding Hybrid) and they informed me that the hands free liftgate feature will still work but you will need to position your foot on either side of the receiver tube. They did not mentioned any kicking motion. I don't believe the surround sensors, backup sensors, or pre collision avoidance features will be hampered by the hitch but the pre collision avoidance has not been tested....
    view full answer...
    Image 1 for Image 2 for
  • What Size Hardware Comes With The Curt Hitch C13126 For A 2017 Infinity QX60?
    Hi Dana! The hardware that comes included with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13126 for your 2017 Infinity QX60 is as follows: Qty.6 of M12-1.25 x 30 CL10.9 Cap Screw Qty.6 of 1/2" Conical Tooth Washer Do you already have the hitch and are needing hardware or are you wanting to clean out the threads before mounting the hitch?
    view full answer...
  • Curt Trailer Hitch Needed For A 2013 And 2023 Hyundai Sonata Hybrid
    Hey Jack, The Curt Trailer Hitch Receiver # C13126 is not a fit for a Hyundai Sonata but is for the following vehicles: 2013 - 2013 Infiniti JX35 2013 - 2016 Nissan Pathfinder 2014 - 2020 Infiniti QX60 For a 2013 Hyundai Sonata Hybrid you would need the Curt Trailer Hitch Receiver # C11025 (1-1/4" receiver tube opening). For a 2023 model you would need the Curt # C23RV (excluding N-Line models) (1-1/4" receiver tube opening). There are currently no custom fit options with a 2" receiver...
    view full answer...
  • Best Trailer Hitch And 7-Way Wiring Harness For 2018 Infiniti QX60
    Hello John, thanks for reaching out. It sounds like you are wanting to add a 7-way trailer plug to your 2018 Infiniti QX60. We can absolutely provide the parts for that, but the two parts you mentioned actually would not work together, so you will want something different for the wiring. Here is what you will need: - T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118273 Then you can use a bracket like part # PK12711U to attach the plug to the hitch or...
    view full answer...
  • Will Spare Tire Fit With etrailer Hitch on 2020 Infiniti QX60
    You will be able to keep your spare tire mounted under the vehicle following the installation of the etrailer # e73AR. The spare tire will need to be lowered or temporarily removed to install the hitch. Once the hitch is installed, you won't have any issues putting it back into place. The only exception would be if you added some kind of aftermarket spare with an oversized tire. Temporary removal or lowering of the spare is very common for hitch installation. The reason you don't see...
    view full answer...
    Image 1 for
  • Is Thread Locker Necessary on Bolts When Installing a Trailer Hitch
    The Curt Class III trailer hitch for your Pathfinder, part # C13126 would utilize nuts that are welded up into the frame member. The conical toothed washers used in the installation do a good job of maintaining the torque applied to the bolt during installation, so threadlocker like # LT37420 isn't necessary although using it won't cause any harm. If you decide to use threadlocker, and you decide at some point in the future to remove the hitch you'll want to remember to apply heat to...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2013 Infiniti JX35
    Both the Draw-Tite Class IV Max Frame Round Tube Receiver Hitch # 76031 and the Curt Class III # C13126 referenced in your question are confirmed to fit your 2013 Infiniti JX35. Between the two models, I do recommend the Draw-Tite # 76031. The crosstube design on the Draw-Tite drops down as it extends to meet the receiver, which in turn exposes it a bit more under the rear bumper of your vehicle. This is simply going to provide more mounting space for which to mount a connector bracket...
    view full answer...
    Image 1 for Image 2 for
  • How Can I Tell if My 2013 Nissan Pathfinder Came With Factory Tow Package
    All 2013 Nissan Pathfinders came pre-wired for a tow package, so we know your Pathfinder at least has something. If your Pathfinder came with the tow package option from the dealer, then you would have a trailer hitch and trailer wiring at the back of the Pathfinder. Since you are asking for a wiring kit, I'm guessing you need the wiring still. For this I recommend the Curt 7-Way Wiring Harness, # C56357, if you want a 7-pin trailer connector or the Curt 4-Way Wiring Harness, # C56281,...
    view full answer...
  • Will Curt Hitch C13126 Install on 2017 Infiniti QX60 with Hands Free Liftgate
    With the Curt hitch part # C13126 installed on your 2017 Infiniti QX60 you still will be able to use the hands free liftgate of your vehicle but you will have to kick to either side of the hitch opening to activate it. I attached an install video for this for you to check out as well.
    view full answer...
    Image 1 for
  • Does Bumper Fascia of 2013 Inifiniti JX35 Need to Be Modified to Install a Hitch
    Whether you'll need to modify the bumper fascia or not will depend on which hitch you choose. The nice thing about the Curt Class III you mentioned, part # C13126 is that the entire hitch with the exception of the receiver opening is concealed behind the vehicle bumper. According to the installation instructions, a small (1-3/8 x 2-1/2 inch) area of the underside of the bumper fascia would need to be trimmed away. I've linked you to photos showing the area that would be trimmed and how...
    view full answer...
    Image 1 for
  • Recommended Hitch and Wiring to Tow Max Capacity of 2013 Nissan Pathfinder
    The heaviest rated hitch we have available for your 2013 Nissan Pathfinder is the Curt # C13126. This Class III 2 inch is rated for 600lbs tongue weight and 4,000lbs towing capacity; if used in combination with a weight distribution system it will have 5,000lbs towing capacity. You will be limited by your lowest rated item which may be the capacity of your vehicle. The Curt hitch is also going to be the hitch that looks most like the factory hitch. I have linked a picture of this hitch...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Recommended Maximum Towing Capacity of 2013 Nissan Pathfinder
    The actual towing capacity of a vehicle is a function of both the vehicle itself, as rated by the auto maker based on the specific equipment included, and of the particular hitch that is installed. Although all the hitches we offer for your 2013 Pathfinder are the 2-inch type, these have varying towing capacities. For instance, Curt Class III hitch # C13126 is rated for 4000-lbs towing, but if used along with a weight distribution (WD) system such as the Reese # RP66084 the hitch capacity...
    view full answer...
  • Will Trailer Hitch From 2016 Nissan Pathfinder Fit a 2018 Nissan Murano?
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13126 you purchased for your 2016 Nissan Pathfinder is not a fit for a 2018 Murano. That hitch is only a fit for 2013 - 2013 Infiniti JX35, 2013 - 2016 Nissan Pathfinder, and 2014 - 2019 Infiniti QX60. For a 2018 Nissan Murano I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75952. This is an easy installation and a very strong trailer hitch. I've attached a video of this installation...
    view full answer...
  • Can I Use Weight Distribution System with 2014 Infiniti QX60
    I would contact your Infiniti dealer to make sure your hitch is rated for weight distribution, but since it is a class III hitch most likely it is. Curt does makes a class III trailer hitch for the 2014 Infiniti QX60 that is rated for weight distribution. Curt hitch # C13126 has a maximum gross trailer weight of 4000 lbs and a maximum gross trailer weight of 5000 lbs when used with weight distribution. If you find that you can use a weight distribution system you will want to base your...
    view full answer...
  • Trailer Hitch Recommendation for 2013 Infiniti JX35 for Towing Sea Doo Trailer
    For your 2013 Inifiniti JX35 the Curt hitch part # C13126 is what I would recommend. Like you said it's much more hidden so it's easier on the eyes. It's also priced a little better as well and has more than enough capacity for your Sea Doo and trailer. For trailer wiring you would want the Curt Powered Tail Light Converter Kit with 4-Pole Flat Trailer Connector Item # C56190KIT. I attached an install video for this for you to check out as well on a vehicle just like yours down below. Since...
    view full answer...
  • Hidden Trailer Hitch Recommendation for 2019 Infiniti QX60
    For your 2019 Infiniti Qx60 the Curt hitch part # C13126 is what you want. Unlike the other hitch for your vehicle it has a concealed crosstube which means you'd only ever see the hitch opening. See picture. For trailer wiring you'd then want the # 118273 for a 7-way or # 118670 for a 4-way. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or...
    view full answer...
    Image 1 for
  • Recommended Bike Rack for Radwagon 3 and Pedego Beach Cruiser on 2018 Infiniti QX60
    While I do not have the exact specs of your Radwagon 3 2020 edition, it looks like it has front fenders and a rear cargo platform. I also looked up the available specs on your Pedego electric beach cruiser, and that looks like it has a rear cargo platform as well. For the best option that provides you with a lot of weight capacity, I recommend the Hollywood Racks RV Rider # HLY64FR. This rack comes with a massive 80 pound per-bike weight capacity and comes with included locks to deter...
    view full answer...
  • Will Weight Distribution Allow 2014 Nissan Pathfinder to Tow Heavier Trailer
    You will need to look to see if the vehicle has a second higher capacity when used with a weight distribution system. Typically there will be two sets of capacities. Weight carrying (which will be lower) and weight distribution (which will be higher). For your 2014 Nissan Pathfinder we have the Curt hitch part # C13126 which is rated for use with WD and it has a 4,000 lb towing capacity with 600 lbs tongue weight. For a WD system the part # RP66083 would work well as it has a tongue weight...
    view full answer...
  • Trailer Hitch and Wiring for a 2016 Infiniti QX60
    For a trailer hitch that fits your 2016 Infiniti QX60 AND does not require any trimming you can use Draw-Tite trailer hitch # 76031. The other hitch option requires trimming. I have linked a video showing an example installation for you. For trailer wiring you can use # C56357 to add a 7-Way connector or # C56281 to add a 4-Way flat connector. I have linked videos showing example installations for you. I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with...
    view full answer...
  • Trailer Hitch, Wiring and Weight Distribution Recommendation for 2015 Infiniti QX60
    The trailer hitch I recommend for your 2015 Infiniti QX60 is the Curt hitch part # C13126 as it has plenty of towing capacity and also only has the hitch opening visible below the rear bumper so it's the most hidden. I attached an install video as well. For trailer wiring the best kit is the part # 118670 as it's easy to install and very reliable. Install video link attached for this as well. So anytime the weight of the trailer ends up being more than half of the weight of the tow...
    view full answer...
  • Should Additional Transmission Cooler be Used When Towing at Max Capacity with 2014 Pathfinder
    If you are planning on maxing out the 5,000 lb towing capacity of your 2014 Nissan Pathfinder then yes, it would be wise to install a supplemental transmission cooler like the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13502. Since you will really be pushing your transmission to its limits this additional cooler will help to reduce some of the heat stress, but towing at max capacity will still be pretty rough on your vehicle. I also recommend using the Equal-i-zer Weight Distribution...
    view full answer...
    Image 1 for
  • Does Trailer Hitch Hardware Have to be Torqued to the Specifications in the Instructions
    The hitch is rated for its given capacity when installed according to the installation instructions and that includes the torque ratings specified in the instructions. If they are too tight you can damage the hitch and vehicle frame. Not tight enough and the hitch could come loose. If you do not have a torque wrench many auto parts stores will loan out tools. I recommend calling around to a few places to see if they have a tool loan program so you can torque down the hitch hardware to...
    view full answer...
  • Hitch and Wiring Harness for 2014 Nissan Pathfinder
    I have attached a video of the Curt Trailer Hitch Receiver, # C13126, being installed on a 2014 Nissan Pathfinder for you. As for the Pollak 7- and 4-Pole Trailer Connector Socket, # HM40975, this would be used in conjunction with a factory pigtail which comes with the factory tow prep package. I have also included a video which shows the process. In order to equip your vehicle with a 7 way and not use the factory pigtail, you would need to install T-One Vehicle Wiring Harness, # 118670,...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.