Difference Between The Curt # C13382 Trailer Hitch And etrailer # e98912 Trailer Hitch

Question

Question:

Hi, I have a 2023 Subaru Crosstrek and would like to get a hitch for it. what is the big difference between the etrailer and class III Curt hitch?

asked by: Luc A

0

Expert Reply:

The only difference between the Curt Trailer Hitch Receiver # C13382 and etrailer Trailer Hitch Receiver # e98912 is simply the paint job. The etrailer hitch comes with a matte black powder coating, whereas the Curt hitch comes with a high gloss powder coating.

I tend to think the matte black coating blends in better with the black plastic undercarriage covers and is much more forgiving with scratches from road debris, unlike the high gloss that typically shows every scratch.

If you plan on towing a trailer then you'll also need a 4-pole connector like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467. The installation is super easy since this harness comes with plug-in connectors.

expert reply by: Kevin C

0

Answer 1

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 2

Yes, it does. We have had a customer install the etrailer Hitch item #e98912 on their 2024 Subaru Crosstrek with no issues. This hitch is custom fit and bolts to your Crosstrek with included hardware. It does not fit the Hybrid models. Besides being…

view full answer...

Answer 3

Your 2021 Subaru Crosstrek Sport has a maximum tongue weight of 200 lbs. Depending on your hitch receiver, this maximum tongue weight is less than what your hitch receiver is rated to carry. The maximum tongue weight you must adhere to, is the lower…

view full answer...

Answer 4

From the center of the hitch pin hole of the EcoHitch part #306-X7365 out to the furthest point out on the rear bumper measures 3 inches. This would be easily more than enough clearance since you measured from the hitch opening to the back of your…

view full answer...

Answer 5

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

view full answer...

Answer 6

I will start by confirming that both the etrailer hitch item #e25TR and the Curt hitch item #C67JR fit your 2023 Subaru Outback Wagon. They are custom fit and bolt to your Subaru with included hardware. Both the etrailer and Curt hitches are…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Difference Between The Curt # C13382 Trailer Hitch And etrailer # e98912 Trailer Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching