Easiest Plug and Play Brake Controller For a 2024 Jeep Grand Cherokee

Question

Question:

What is the easiest to install brake controller for my 2024 Jeep Grand Cherokee?

asked by: Heath

0

Expert Reply:

The Curt Echo Under-Dash Bluetooth Brake Controller # C27JR will provide you with one of the easiest installations as the Pigtail # C51446 will connect it to your factory wiring. And unlike other controllers there is no dash mounted controller or knob so everything simply gets secured under your dash. Then you will control the settings for it with your smart phone using the OneControl app.

expert reply by: Bud M

0

Jacob

3/28/2024

But where is the plug in the 2024 jeep grand Cherokee? I have the factory tow but can’t find where to plug it in.

Bud M.

3/29/2024

@Jacob The factory connector to plug in the brake controller is located behind the left side kick panel in the drivers compartment. The connector is going to be taped up to the harness.

Answer 1

There are a couple key differences between the Curt Echo Mobile part #C51180 and the Echo Under Dash #C27JR with the install harness part #C77BR. If you wanted the absolute easiest install that literally takes seconds go with the Echo Mobile as it…

view full answer...

Answer 2

Curt has a brake controller install harness that fits your 2023 Jeep Grand Cherokee L with the part #C51446 which you could use with a Curt brake controller like the Triflex part #C51140. To find the connector in your vehicle you'll need to drop…

view full answer...

Answer 3

I do have an option for you but there isn't a traditional stop light switch circuit on a 2023 Jeep Grand Cherokee L. Therefore, if you want to use a wired trailer brake controller you'd need a stop light switch like the RoadMaster Stop Light…

view full answer...

Answer 4

You will need the Stop Light Switch Kit #RM-751449 for your 2019 Jeep Grand Cherokee. This will provide you with a brake signal as the factory brake switch wiring is very thin and not recommended for splicing into. This switch includes a custom fit…

view full answer...

Answer 5

For the correct plug-and-play wiring harness to go with the Curt Spectrum Trailer Brake Controller #C51170 on your 2022 Jeep Grand Cherokee with a 7-way and tow package, that is the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51446.…

view full answer...

Answer 6

For your 2019 Jeep Grand Cherokee, the harness connection point is under the dash to the left hand side. I've attached a photo to help as well as a video of this installation. If you are using a Tekonsha Brake Controller like the Prodigy P3…

view full answer...

Answer 7

The easiest brake controller to install on your 2024 Jeep Grand Cherokee is the Curt Echo Wireless Brake Controller #C51180 because it simply plugs into the 7-Way on your vehicle and then your pair your Apple or Android to it to monitor and adjust…

view full answer...

Answer 8

Yes, the Curt Echo is compatible with the factory tow package on your 2024 Jeep Grand Cherokee, and it comes in the following designs: - Echo #C51180 - Echo Under-Dash #C27JR and Wiring Adapter #C51446 - Echo In-Line #C79DR Most people are referring…

view full answer...

Answer 9

A single green light with the Curt brake controller part #C74VV means that no trailer is connector and the manual override or brake pedal is pressed. If you are seeing that all the time you most likely have a short between the power wire of the…

view full answer...

Answer 10

Hey Joan, There isn't a Tekonsha custom-fit harness but there is a Curt harness #C51446 that you can cut the connector off of and butt connector #224775 on a Tekonsha connector #20127 so that you don't cut into your factory wiring. You'll…

view full answer...

Answer 11

Hi Ed; there will be no need to have the computer flashed to install a brake controller like the #C28SV. You will plug it into the tow port and everything should work as intended. However, I do have a different recommendation for a brake controller.…

view full answer...

Answer 12

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Easiest Plug and Play Brake Controller For a 2024 Jeep Grand Cherokee

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching