Recommended Replacement For A Power Gear Slide Out Motor # 524065

Question

Question:

I need a replacement motor for a powergear slide out motor part number 524065. Nash trailer 27f 8 foot slide

asked by: Ken M

0

Expert Reply:

I reached out to Lippert and found that the correct replacement for your Power Gear Slide out motor 524065 is the Replacement Slide Gear Motor Assembly for Power Gear Slides # LC387738.

Thank you for the pictures, it makes it way easier to find the correct replacement when I can see the label and get the part/serial numbers.

expert reply by: Kevin C

0

Slide out motor 1
(click to enlarge)

Slide out motor 2
(click to enlarge)

Slide out motor 3
(click to enlarge)

Answer 1

Hey, Chris. After doing some research and checking with Lippert, It looks like the only replacement part they have for the Venture Actuator and High Speed Slide-Out Motor, part #LC168956 is the motor itself, part #LC295380. In my searching It looks…

view full answer...

Answer 2

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 3

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 4

The Power Gear Motor 1010000155 has direct replacements of Replacement Motor for Lippert Power Gear Electric Leveling Jack System part #LC386198 or part #LC89CJ. These can actually be used on either side. I reached out to Lippert and they said to…

view full answer...

Answer 5

The trim plate for the High Pointe RV Convection Microwave #HP99ZR has an overall size of 24" wide x 16.75" tall.

view full answer...

Answer 6

Hey Rick, we actually have a direct replacement for the High Pointe EC028BMR with our part #HP99ZR so this would be what you'd want if you were looking for an exact replacement. But if you preferred the part #HP56ZR it would also fit in place of…

view full answer...

Answer 7

We sure do! The correct replacement slide out motor for your Power Gear 1510000042 is part #LC88UD on our site.

view full answer...

Answer 8

The spindle nut on a trailer axle should not be difficult to remove, it only requires a very small amount of torque. It should for the most part just turn off by hand after the retainer is removed whether it's a clip or pin. We don't have a…

view full answer...

Recommended Replacement For A Power Gear Slide Out Motor # 524065

Product Page this Question was Asked From

Continue Researching