Video Transcript for Review of etrailer Camper Jacks - Scissor Stabilizer Jacks Qty 2 - e96VV

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at these etrailer Scissor Stabilizer Jacks. Now, these compact, user-friendly scissor jacks are gonna be a must-have to keep on your RV, your fifth-wheel, your travel trailer, horse trailer or cargo trailer to help keep them level and stable. So, when you're in your camper and you're walking around in it, sometimes it can rock back and forth. When you have these stabilizer jacks installed and in use, you're not gonna have to worry about that movement inside of your trailer when you're walking around in your trailer, so this is gonna be an essential piece of equipment to have. Now, these are going to adjust from five inches when they are fully collapsed, as I have them right now, all the way up to 29 inches when fully extended, so these are gonna give you a lift of 24 inches, and the support capacity on each jack is 7,500 pounds, so with both of these here, you're gonna get a total capacity of 15,000 pounds.

And taking a close up here, the bearing set on the crank side is going to extend the life of the jack, and as you probably saw here, a handle is included with this. So, this is gonna be very easy to use, and I just wanna give you a brief demonstration here. So, these are going to operate very smoothly, and so they're going to extend and retract very easily. And then you're also, I think this is a nice addition, you're also going to get this drill bit attachment socket that's going to let you operate the jacks with the power drill, so if you wanna make it even quicker to extend or retract these, that bit is included to hook up to your drill, so that's a really nice addition that's included here. Now, the bow-tie bases are going to keep these jacks steady, even on soft surfaces, and the holes here on the top plates are going to allow for adjustability when mounting.

Speaking of mounting, this does include the mounting screws that you see there. The front center of my table here, the screws are zinc-plated, so they're built to last. And these jacks themselves, they are powder coated in a black powder coat, so they're gonna do a great job of resisting corrosion. I think they're gonna hold up really well for you. These do have a limited lifetime warranty.

Now, again, this is gonna be for a set of two, but if you're looking for more, the good news is we do have this available in a set of four. So, with that set of four, you will get two handles and two of those drill bit sockets, so a set of four, and then if you're just needing to replace one, we do also provide this in just a quantity of one. So, whichever one's gonna work best for you, whether it's four, two, or one, we've got you covered here at etrailer.com. Well, I think that's gonna wrap up our look today. I do hope that it was helpful for you.

Again, my name is Andy, thank you for joining me.