Waterproof Storage Cover for 1953 Canned Ham Vintage Trailer

Question

Question:

Hi there, Can you recommend which waterproof, breathable cover will work on my 1953 Terry Rambler trailer? Box is 13’-6 x 6’-9.

asked by: Bernadette F

0

Expert Reply:

The best option for canned ham style trailers is a bumper pull horse trailer cover like the Adco SFS Aquashed Trailer Cover part # 290-46003 which would be correct size. I attached a picture that shows a similar canned ham style trailer using this cover.

expert reply by: Jameson C

0

1954 Canned Ham Trailer 1
(click to enlarge)

Answer 1

Ernest, I completely understand why you are asking before ordering because once you get into the heavier #13 Torflex axle setups, a wrong fit can turn into a frustrating and expensive project pretty quickly. Dexter does not currently offer a…

view full answer...

Answer 2

The best cover we have for the dimensions of your trailer is going to be the Adco SFS AquaShed Cover for Bumper Pull Trailer #290-46003 which is designed for trailers up to 14 feet in length, is 9 feet wide, and 8 feet tall so it will match your…

view full answer...

Answer 3

Yes, the sides of the Adco SFS AquaShed Cover for Toy Hauler Travel Trailer #290-52272 that you referenced can be removed to give access to side doors on the front or rear of a travel trailer. On the side there is a front and rear panel that can be…

view full answer...

Answer 4

You are going to need to replace your tail lights on your 2006 Karavan trailer with the LED Combination Trailer Tail Lights #STL57RB & #STL56RB. I was unable to find any information on your specific Wesbar tail lights as the information you…

view full answer...

Answer 5

I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…

view full answer...

Answer 6

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 7

Hi Tom, We have two axles rated for 3.5K that have an 85" hub face measurement, but they have different spring seat measurements. The Lippert Beam Only Trailer Axle part #LC93PK has a 70" spring center to spring center measurement and fits…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

Thank you for reaching out! The best thing for your situation is to go with the 3,500 lb Dexter Axle #T3584F-8974 you are looking at. While you can upgrade your axles to the 5,200 lb #e55GR, you won't really see a benefit from it unless you also…

view full answer...

Waterproof Storage Cover for 1953 Canned Ham Vintage Trailer

Product Page this Question was Asked From

Continue Researching