Throw this storage cover over your horse trailer to protect it from rain and snow while you're storing it in between trips. Cover wraps around the bottom corners of your trailer and secures with integrated straps so it won't flap in the wind.
Features:
Specs:
You're worried about your horse trailer getting wet and dirty in storage before you need to transport your horses again. Whether you're storing your trailer in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your trailer will be protected. When you keep your trailer covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your trailer in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply SFS AquaShed top panel reduces moisture buildup that can damage your trailer over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your trailer. And when the rain stops, the fabric dries quickly to minimize the development of mold and mildew. The top panel blocks the roof of your trailer from mild sunlight as well, protecting the cover from cracking and fading.
How to Measure Your Horse Trailer
To determine if this cover will work for you, measure the overall length of your trailer from the very front to the rear bumper, making sure you're accounting for any gear on the back. The cover isn't meant to fit over the tongue of your trailer, so don't include it in your measurements. Then measure the overall height from the bottom of the trailer to the top. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover onto Your Trailer
First unroll the cover and carefully spread it evenly around your trailer, making sure you don't pull too hard and tear the fabric. Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your trailer to remove any excess slack in the material. Attach the included cinch ropes to the front and the rear of the cover and pull on them until the cover fits snugly around the contours of your trailer. And then toss the weighted straps underneath your trailer to the other side and buckle them together, which keeps the cover secure and prevents it from flapping in the wind and damaging the paint job.
And if you need to grab supplies, you can use the zippered panel on the passenger's side to easily access the interior of your horse trailer without having to completely remove the cover. You can also unzip the entire panel on the back of the trailer so you can open the tack door and load and unload gear.
Do you have a question about this Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.