How Long is Warranty of Roadmaster Exact Center Steering Stabilizer

Question

Question:

What is the warranty period on the Exact Center Steering Stabilizer? I have had a few less than greatinch experiences with gas filledidevices .......... especially storage bay door struts and automotive trunk/hood struts.

asked by: Edwin S

0

Expert Reply:

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM42RR that you referenced has a limited lifetime warranty that protects you for as long as you have it.

expert reply by: Jameson C

0

Answer 1

The 2017 Coachman Mirada Select 37TB is built on the Ford F53 chassis. To reduce the sway, you are absolutely on the right track with the parts you are requesting. I recommend the following parts: Roadmaster Rear Anti-Sway Bar for Motor Homes…

view full answer...

Answer 2

The locking/jam nuts on the Roadmaster Exact Center Steering Stabilizer #RM72ZR are 1/2" so you will need a 13/16" wrench for that.

view full answer...

Answer 3

Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights #RM-676 has a self aligning design which means that once you hook up the to bar to your vehicle and your RV and drive forward the arms will extend and lock into place automatically.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

How Long is Warranty of Roadmaster Exact Center Steering Stabilizer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching