Jam Nut Size of Exact Center Stabilizer

Question

Question:

What is the size of the locking nuts?

asked by: Dan

0

Expert Reply:

The locking/jam nuts on the Roadmaster Exact Center Steering Stabilizer # RM72ZR are 1/2" so you will need a 13/16" wrench for that.

expert reply by: Kyle S

0

Answer 1

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM42RR that you referenced has a limited lifetime warranty that protects you for as long as you have it.

view full answer...

Answer 2

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 3

The first thing you need to do when installing the #RM33RR, which is the #RM36RR with the brackets, is to center the steering wheel and lock it into place. If your tires weren't straight ahead when you installed this it is going to pull. Assuming…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 9

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 10

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Answer 11

Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…

view full answer...

Answer 12

Hey Dan! Demco doesn't make specific adapters but you can use the Roadmaster Adapter #RM-035 (3/4" thick D-ring bumper mounts) or #RM-035-1 (1" thick) to attach it to your bumper. You will likely need some additional bushings for proper…

view full answer...

Jam Nut Size of Exact Center Stabilizer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching