"L" Error Code on Controller for SaltDogg Salt Spreader
Updated 11/26/2024 | Published 12/15/2022
Question:
I know the L code is for under 10v for more than 10 sec. But I have 12.43v at the battery all the way to the plug at the controller. I have both the positive and negative directly wired to the battery terminals with zero splices so I have a strong ground. I connected a working spare controller and got the same L code on both the spinner and the auger display. Any help is appreciated.
asked by: Matt
Expert Reply:
I spoke to Buyers about the issue you're having with your SaltDogg Salt Spreader and they informed me that you will want to apply power directly to both the spinner and auger to ensure they are working correctly. The systems all feed back into the controller so if there is an issue with either of these it will show as an error on the controller. The other thing you'll want to do is test the output wires from the controller, you'll want to ensure both the input and output wires have enough voltage. If there is good power going into the controller but not leaving then you know it's the controller that needs replaced, the Replacement Variable Speed Controller for SaltDogg Salt Spreader part # BP54FR.
If it turns out that another part is faulty, please just let me know what that is and I'd be glad to see if we have a replacement option for you.
Product Page this Question was Asked From
Replacement Variable Speed Controller for SaltDogg Salt Spreader
- Accessories and Parts
- Salt Spreaders
- Speed Controller
- Buyers Products
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What Does Flashing Letter L Mean on Variable Speed Controller for SaltDogg Salt Spreader
- Q&A: My SaltDogg Controller Shows the Letter P Code NOT Flashing what Does this Mean
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 250-lb Capacity
- Shop: Brophy Cable Camper Jacks - 57" Max Lift Height - 1,000 lbs - Qty 2
- Shop: Replacement Variable Speed Controller for SaltDogg Salt Spreader
- Q&A: Troubleshooting Flashing Letter P on Variable Speed Controller for SaltDogg Salt Spreader
- Shop: Trailer Hitch
- Shop: Optronics Incandescent Trailer Clearance and Side Marker Light - Submersible - 2 Bulbs - Red Lens
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Optronics Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Square - Amber Lens
- Search Results: hitch
- Search Results: trailer tires and wheels
- Search Results: mc36ab
- Search Results: tire with wheel
- Search Results: mc65rb
- Search Results: tires
- Search Results: trailer hitch
- Q&A: What Does The Blinking J Mean On The SaltDogg Controller
- Shop: Trailer Wiring
- Video: A Closer Look at the B&W Tow & Stow Ball Mounts Serrated Hitch Mounted Step
- Video: Review of B and W Hitch Step - Ball Mount Step - BW85FR
- Q&A: Troubleshooting J and P Codes on SaltDogg Electric Tailgate Salt Spreader
- Shop: Salt Spreader
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
Jonathan
11/26/2024
So what was the answer to that L code