What Does The Blinking J Mean On The SaltDogg Controller

Question

Question:

I have a salt dog spreader the auger moves freely and their is nothing in the salter but it has a blinking J on the controller and spinner doesn’t move???

asked by: Rickey

0

Expert Reply:

The blinking J on the Controller for SaltDogg Salt Spreader # BP54FR indicates the spinner motor is jammed. You will need to turn the controller off and clear the jam.

expert reply by: Jesse M

0

Answer 1

The problem you're seeing with the SaltDogg Electric Tailgate Salt Spreader #337TGS03 sounds like it's either with the controller or with the harness. Try testing the harness by applying power to make the motor spin. If the problem still…

view full answer...

Answer 2

The "P" code on your Replacement Variable Speed Controller for SaltDogg Salt Spreader part #BP54FR is the code for the spinner motor being disconnected. They recommend inspecting the wire harness/motor for damage and then reconnecting and…

view full answer...

Answer 3

I spoke to Buyers about the issue you're having with your SaltDogg Salt Spreader and they informed me that you will want to apply power directly to both the spinner and auger to ensure they are working correctly. The systems all feed back into…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

What Does The Blinking J Mean On The SaltDogg Controller

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching