Camper Tie Down Recommendation for a 2000 Chevy 1/2 Ton Silverado

Question

Question:

I have a 2000 Chevy 1/2 ton extended cab and I want to put a pop up truck camper on this truck. The truck has a standard bed. What tie downs are recommended? Thanks,

asked by: Don S

0

Expert Reply:

There are several camper tie downs that you could use depending on how you want them to mount. First, the Camper Tie Downs, # TDSF, that you have referenced will fit your truck and fit in the truck stake pockets. If you do not want something in the stake pockets, then I recommend going with Camper Hold Down, # HSSF, which wrap around the bed side. For either kit, use Camper Tie Down Hardware Package, # TDHP.

expert reply by: Jameson C

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 3

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

view full answer...

Answer 4

Since your doorway/threshold height is 36 inches the correct Torklift GlowStep is the part #TLA8004 which has a threshold height range of 32-1/2" - 44" and would work perfectly. I attached an install video for this kit as well as a picture…

view full answer...

Answer 5

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

view full answer...

Answer 6

Congrats on your new truck camper Dan! For a set of tie downs that fit your 1978 Chevy C30 truck, I recommend the Brophy Stake Pocket Mounted Camper Tie-Downs item #TDSF. These are universal tie-downs that are designed specifically for older trucks.…

view full answer...

Answer 7

Hey Greg, you shouldn't need any wiring extensions with the install of the Happijac extension brackets #HJ54FR. If you check out the attached picture you can see where a customer of ours installed these brackets and had more than enough wiring…

view full answer...

Answer 8

The Brophy Camper Tie Downs, part #TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part #HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and…

view full answer...

Answer 9

Hey Eric! Yes, the Brophy Slide In Camper Tie-Downs #HSSF will fit your 2026 Ram 2500. If you prefer the extra clearance model with the angled design #HSAB is also available and will fit. To complete your setup you will need turnbuckles like the…

view full answer...

Answer 10

The The Brophy Camper Tie Downs #TDSF, are a universal fit kit intended to fit as many trucks as possible. While there is nothing to say that it for sure fits, looking at your pictures it seems likely that it will work for your 1968 Ford F-250 Camper…

view full answer...

Answer 11

Hi Dennis! The Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Zinc Plated Steel - Qty 4 #HSBP will definitely fit your 2019 Ford F-150 with the 6.5 foot bed, so that part is not in question. That said, I absolutely cannot recommend putting a…

view full answer...

Camper Tie Down Recommendation for a 2000 Chevy 1/2 Ton Silverado

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching