Correct Hubs/Drums and Brakes for an Axis 3,500 Lb Trailer Axle
Published 12/12/2022
Products Featured in This Question
Question:
I am currently looking to replace the electric brake assembly and swap over to an integrated hub and drum assembly. The axle tag says it’s an Axis 3,500 lb cap and it shows the serial # 518576 917-19709. Evidently the previous owner had lost a wheel bearing and I’m thinking they found an idler hub that fit and left the drum assembly off or it originally came with a separate hub and drum assembly. The current hub that I want to replace has P1581750 on it and the drum has Axis and CBI 08D2 on it. I’m looking at your PN AKEBRK-35 for the brakes and AKHD-545-35-K for the drum. The Axis information I can find online hasn’t been much help. I’ve had great service from E-Trailer for my TT with the same problems. Y’all are great.
asked by: Clarence W
Expert Reply:
I do have some options for you but we don't really have the ability to look up old trailer part numbers, especially from less common manufacturers such as Axis. That said, pretty much every 3,500 lb trailer axle over the last few decades has used the same size spindle and brake mounting flange so odds are very likely that the Electric Trailer Brake Kit part # AKEBRK-35 and Trailer Hub and Drum Assembly part # AKHD-545-35-K will work for you.
If you want to be absolutely certain there is no chance for error, you will have no other options but to pull the hub apart and measuring the bearings or spindle. I have attached a help article below if you need further assistance on this.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1
- Search Results: tang washer
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: hub
- Shop: Ark Xtreme Off-Road Jack w/ Dual Wheel - Sidewind - 10" Lift - 1,100 lbs - Black
- Shop: Bright Way Solar Battery Charger - 7.5 Watt Solar Panel
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Correct Replacement Hub for Boat Trailer with 3,500 Lb Axle.
- Search Results: hubs
- Search Results: 5 on 425
- Search Results: trailer hubs and drums
- Search Results: etrailer trailer hubs and drums
- Search Results: trailer hubs
- Video: etrailer Easy Grease Trailer Idler Hub Assembly Review and Installation
- Video: Trailer Idler Hub Assembly for 3,500-lb Axles Review
- Video: Ultimate Overview of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: Do Safe-T-Lube Axles Use The Same Parts As Dexter EX Lube Axles?
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Grease Seal for Timken 171255
- Q&A: Recommended Replacement Hubs, Drums, and Brake Actuator for a 1986 Glastron Boat Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
on Trailer Brakes
