bing tracking image

Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-5475-35-K

content loading

Customers compare AKIHUB-5475-35-K to these similar products




Products Featured in this Video



etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-5475-35-K Review


Jeff: Hello, everybody, this is Jeff at Etrailer.com. Today we're going to take a look at this pre-greased trailer idler hub for 3,500 pound axles. It has the five on four and three quarter inch bolt pattern. Now this trailer hub assembly is designed to fit idler axles, and this is a pre-greased hub. It makes it very easy to install. So there's no need to have to pack your bearings with grease.

These will come already greased with lithium complex multipurpose grease. It does include the pre-greased inner bearing, which is part number L68149. And the bearing race that it sits in comes with the outer bearing part number L44649 and the bearing race for that one. It does also have the installed grease seal in the rear it's part number 58846. And if you notice, I laid out, it comes with the grease cap that goes right there and then five and a half inch by 20 size lug nuts.Now this hub is a sturdy iron construction has a zinc and rich paint for durability.

It is QAI and CSA certified. Specs again for this, the application is 3,500 pound trailer axles with the number 84 spindles. And it is compatible with standard axles for most manufacturers, including axle tech, Dexter Lippard and Alco the hub diameter, which is measured from this end to this end is six and a quarter inches. So it is designed to fit 13 to 15 inch wheels. Bolt pattern we mentioned on this is five on four and three quarters and the wheel stud diameter is a half an inch.

So it accepts the half-inch lug nuts to hold your wheel and tire assembly to the hub. But that should do it for the review on this pre-greased trailer idler hub for 3,500 pound axles with the five on four and three quarter inch bolt pattern..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Dustin K
Video by:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.