Hopkins Trailer Wiring Harness Fit For 2021 Subaru Crosstrek Non-Hybrid

Question

Question:

Can you verify the fitment of the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # HM11143865 on a 2021 Crosstrek? I have one on mine and would like to install one on my sons cars, but it showing as not a possible fit.

asked by: James A

0

Expert Reply:

I checked directly with Hopkins and part you mentioned does not fit the 2021 Subaru Crosstrek, it is for certain model year Forester and Outbacks. So long as your son's '21 Crosstrek is NOT the hybrid version, the correct wiring harness is the following:

- Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector # HM11143885

If he does have a hybrid the only option to install a trailer wiring harness is a hardwire kit, the Vehicle Wiring Harness Kit # C59496.

expert reply by: Kyle S

0

Answer 1

According to an online owner's manual for your 2018 Subaru Outback the 2.5L can tow a trailer up to 2,700 pounds as long as the trailer has brakes. If it doesn't have brakes then the Subaru maxes out at 1,000 pounds. Additionally, there's…

view full answer...

Answer 2

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 3

For your 2002 Acura MDX the highest capacity trailer hitch we offer is the etrailer #e98851 which can tow a trailer up to 3,500 lbs unless you are using a weight distribution system. Then it could tow a trailer up to 5,000 lbs. This hitch does not…

view full answer...

Answer 4

For your 2002 Acura MDX there are a few trailer hitch options. All of them are great and would essentially be just as good as the other. So because of that I would recommend the Curt part #13328 if it were me as it is priced the best. I attached an…

view full answer...

Answer 5

If your trailer uses a 4-pin connector that has five wires leading to it, your trailer uses what is called a wishbone harness. The running light circuit separates at the connector (rather than separating further down the line) with one leg running…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Hopkins Trailer Wiring Harness Fit For 2021 Subaru Crosstrek Non-Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching