Parts Needed to Convert 2004 EZ Loader Boat Trailer to Disc Brakes
Updated 11/07/2022 | Published 11/06/2022
Products Featured in This Question
Question:
Hello. I have a 2004 EZ Loader boat trailer, model number 4-TEZB 23-25/27 7500. It is a tandem axle trailer with drum surge brakes on all four wheels. The actuator is a Titan Model 10 for drum brakes. The spindle measurements are 1.25 for the outer bearing LM67048, 1.75 for the inner bearing 25580 and the seal is 2.13 ID 21334TC. I would like to convert it to disc. Can you help me determine what parts I need to make this happen? Thank you for your help,
asked by: Brian M
Expert Reply:
To start you will want the Kodiak Disc Brake kit part # KOD69FR which is a Dacromet coated hub and rotor kit that fits your spindle. You will need to swap out the grease seals though to the # GS-2125DL since you have the slightly smaller spindle. Then you will lastly need to swap out the master cylinder of your Titan Model 10 drum actuator to the part # T4747100 and you'd be set.
Product Page this Question was Asked From
#42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- 25580
- 3 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: trailer brake controller
- Q&A: Does the Titan Zinc-Plated Brake Actuator T4747200 Have a Reverse Lockout
- Video: In-Depth Review of the Dexter Zinc-Plated Brake Actuator
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs
- Shop: Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators - Drum
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 12" Rotor - 6 on 5-1/2 - 6K
- Shop: DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 12" Hub/Rotor - 6 on 5-1/2 - 6K
- Video: DeeMaxx Disc Brakes | Expert Insights from the Manufacturer
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2-5/16" Ball - 12,500 lbs
- Q&A: Replacement Brake Actuator for EZ Loader Trailer with A-70 Drum Brake Actuator
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Shop: Brake Controller
on Trailer Spindles
