Recommended Hitch for a 2014 Chevy Equinox

Question

Question:

will Item # E98865 fit my 2014 Chevy equinox FWD 2.4 engine

asked by: Thomas J

1

Helpful Expert Reply:

Yes, the etrailer Hitch item # e98865 is confirmed to fit your 2014 Chevy Equinox FWD. This hitch is custom fit and bolts to your Chevy with included hardware.

I have linked a picture below along with an installation video so you can see what this hitch will look like once installed.

If you are planning on towing you will also need a wiring harness item # 118494 and a ball mount kit item # C45534.

The Tekonsha item # 118494 wiring harness is for Equinox's without the factory towing package. If you have the factory towing package you will want the T-One Vehicle Wiring Harness item # 118264.

I have linked installation videos below for both wiring harnesses so you can see the difference in installation methods to confirm which one you need.

expert reply by: Jerred H

1

etrailer Hitch Chevy Equinox
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 3

Hi David! We do have a plug in wiring harness for your 2024 Toyota Highlander XLE with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56RV. This is fully plug and play and will use that square port/plug you already…

view full answer...

Answer 4

If your 2015 Chevrolet Equinox has a factory tow package, there should be a trailer connector at the rear of the vehicle, behind the rear bumper. The connector could also be inside a black box that is mounted under the vehicle. If this is present,…

view full answer...

Answer 5

If you check out the picture that I attached you can see that your Curt Venturer Trailer Brake Controller #C74VV that you installed is detecting an overload or short on the brake circuit of your 2008 GMC Sierra. The wiring adapter #C51515 that you…

view full answer...

Answer 6

What we can do is provide you with the bolt size that is used to install the part #36408 that you referenced and you can find a tap at a local hardware store to clean the threads out if you think they are too corroded. The bolt size is M12 CL8.8. I…

view full answer...

Answer 7

Both the Curt Trailer Hitch Receiver #13591 and the Draw-Tite Max-Frame Trailer Hitch Receiver #76028 are excellent choices for your 2017 Chevrolet Equinox and are confirmed to fit. There are advantages to both trailer hitch options. When the Curt…

view full answer...

Recommended Hitch for a 2014 Chevy Equinox

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching