Determining If Equa-Flex Equalizers LC314336 Will Fit 2020 Coachmen Freedom Express 257 BHS

Published 05/13/2021

Products Featured in This Question

Curved Equalizer for 1-3/4" Wide Double-Eye Spring - 14-3/4" Long - 9/16" Center Hole

(21)

$90.81

MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K

(702)

$279.69

Question:

I specifically asked for height measurements on the MORryde 14-3/4 equalizer when I sent my last question, but was told nothing about that model, and that the LC314336 would work. I included details of the 14336 in my question because it was the only one I saw that came with detailed measurements on your site, and I was seeking the same on your MORryde. Instead of doing that, your expert told me that the LC314336 was the model for me, gave me no measurements, and basically ignored my question. So with these updated pictures clearly showing that the recommended model wont fit, could you please give me different expert advice? I knew the 14336 wouldnt fit when I wrote the last question, sent in a ton of pictures with it to show it, all I wanted was the MORryde measurements. The MORryde seems like the only one that might have an outside shot of working, depending on the measurements, so hopefully asking twice is the key to finding out.

asked by: James

Expert Reply:

Thanks for the pictures!

Since your current equalizer is 14-5/8" long the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K # LC314336 you were looking at will be an exact replacement.

Based on the pictures it looks like from the center of the upper hole to the center of the bottom hole is around 3", and from the center of the upper hole to the center of the bottom hole on the # LC314336 is 3-1/4" as shown in the included diagram, so it will work just fine.

I included a video of the # LC314336 for you to take a look at.

expert reply by: Samuel C

Dimensions Of Equa-Flex Equalizer # LC314336
(click to enlarge)

Dimensions Of MORryde Equalizers # MR34AR
(click to enlarge)

Customer Photo
(click to enlarge)

Customer Picture
(click to enlarge)

James

5/13/2021

Samuel C.

5/13/2021

I apologize for the confusion. I had our warehouse measure the MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K # MR34AR you are wanting and it measures 14-3/4" between the two horizontal mounting holes and 2-1/2" between the center of the upper mount hole to the center of the two horizontal mounting holes as shown in the included diagram. I went ahead and included a video of the # MR34AR for you to take a look at.