Will MORryde Suspension Upgrade Kit MR98ZR Work With Road Armor Equalizers?
Updated 03/08/2024 | Published 05/21/2021
Products Featured in This Question
Question:
It appears that all of the wet bolts are the same as in the Lippert AP kit but this one includes the bronze bushings and is cheaper. I already have the road armor equalizers, will this kit retrofit my RV to wet bolts in all applicable areas?
asked by: Mike F
Expert Reply:
As long as your trailer has the Correct Track and 3-1/8" long shackles measured center to center of the holes the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps # MR98ZR will work just fine with your Road Armor Equalizers.
If you have Correct Track but have short shackles you will need the # MR58ZR with 2-1/4" shackles instead.
Now if your trailer does not have the Correct Track you will need either # MR76ZR if you have 3-1/8" shackles or # MR46ZR if you have 2-1/4" shackles.
I included videos of the products mentioned for you to take a look at.
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 3-1/8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: cre 3000
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: dexter trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Q&A: Does The B&W Companion OEM 5th Wheel Hitch BWRVK3305 Come With All Necessary Hardware?
- Search Results: lc696740
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: BTBRV Magnetic Hitch Receiver Reducer Set - 3" to 2-1/2" & 2-1/2" to 2"
- Video: Review of Dexter Trailer Suspension Parts - HD Upgrade Kit Single Axle Trailer - K71-358-00
- Q&A: Wet Bolt Kit For Road Armor Equalizers on Tandem Axle Trailer
- Video: Hands-On with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: correct track
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: lippert correct track
- Search Results: tandem axle trailer suspension parts
- Q&A: How To Choose Correct MORryde Shackle Upgrade Kit
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
- Q&A: How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Dexter Heavy Duty Suspension Upgrade Kit Installation - 2021 Grand Design Imagine Travel Trailer
- Q&A: Looking For Equalizer And Wet Bolt Upgrade Kit For 2022 Grand Design 2910BH
- Q&A: Replacement for 3,500 lb Axle With 92-1/2 Inch Hub Face Measurement
- Shop: Fifth Wheel Hitch
- Video: Feature Review Dexter Bronze Bushings
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Article: Most Popular Wheel Bearings
Mike V.
3/7/2024
Followup question about the MR58ZR. I have a dual axle with 2-1/4" shackles, and will install your 3rd Generation Correct Track RR23QX. After installing the Correct Track hanger extensions on all three pillars, it appears to me that all 14 shoulder bolts would need to be 3-3/8" long. However, the MR58ZR has two shorter bolts that are 2-7/8". My guess is that the 2nd Gen Correct Track had a different solution. Is there a different kit available with all 14 bolts 3-3/8", or can you include the correct length bolt? Or am I misunderstanding something?