Do You Have a Replacement Camera That Is Compatible With Voyager Monitor WVOM541AP?

Question

Question:

I have the above referenced Voyager Digital Wireless Auto Pairing monitor but need a replacement camera to pair to it. What would work?

asked by: Lauri

0

Expert Reply:

You are going to need to replace your system with the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR as this is the new generation of cameras Voyager switched to. This system uses a stronger signal allowing it to travel up to 60' with virtually no lag time.

expert reply by: Bud M

0

Answer 1

Hello David, thanks for reaching out. I hate to be the bearer of bad news, but your only option here will be a new camera system. The WVOM541AP is the old generation of Voyager monitor which is now discontinued. Voyager moved to the WiSight 2.0…

view full answer...

Answer 2

Hey Chris, yes the part #MC62YR does have the 50.336 motor like you are looking for.

view full answer...

Answer 3

Hey John! You weren't finding that SolidStep because Lippert discontinued it in 2024 and that table wasn't updated to reflect this. What I recommend instead is the MORryde StepAbove RV Steps #MR26RR. These are designed to fit 23-3/4" to…

view full answer...

Answer 4

Hey Nikki, the Lets Go Aero V-Lectric Bike Rack part #LGA97ZR does not have a swing away feature built into it. We do have pivoting adapters that you could use with it like with the Swagman Swivel Hitch Extender #S86SR.

view full answer...

Answer 5

Hey Tom, the thermostat that comes with the Advent Air RV AC System w/ Wall Thermostat #ADV62SR is wired. You would have to run a wire from the thermostat to the air box. What RV AC unit would you be replacing with this?

view full answer...

Answer 6

The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR does not have a power cord or adapter to allow it to plug into a USB outlet so you would need to install a 12v outlet, like part #RM-9332, in your vehicle in order to…

view full answer...

Answer 7

Hi Anne, So what you currently have is the older generation of Voyager camera system, which has been discontinued and replaced by the 2.0 version. That means there isn't a compatible upgrade for the monitor, and you'd have to go with a whole…

view full answer...

Answer 8

More than likely you will need a new system. The WVOM541AP was discontinued. The new monitor is the Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR, but this monitor only works with the WiSight 2.0 systems. You likely have the original…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Torflex Lift Kit #K71-724-02 is meant specifically for the #11 Torflex axles and attaches directly to the side mounted brackets on your trailer's frame without any additional hardware. This kit works with Torflex Axles with a 4,100-6000 lb…

view full answer...

Do You Have a Replacement Camera That Is Compatible With Voyager Monitor WVOM541AP?

Product Page this Question was Asked From

Continue Researching