How to Upgrade from Yakima OutPost to Yakima OverHaul Truck Bed Ladder Rack

Question

Question:

Hi. I have the Yakima Outpost rack on my 2020 Tundra. Can I buy 4 Overhaul replacement towers and swap parts for the times I want to carry loads above the cab of the truck? Thanks in advance.

asked by: Eddie Y

0

Expert Reply:

Yes, the only difference between the Yakima OutPost and Yakima OverHaul are the uprights. Therefore you can use the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights part # Y01151 to convert your Yakima Output to the Yakima OverHaul..

expert reply by: Conner L

0

Answer 1

You're correct, the Yakima OverHaul HD ladder racks like part #Y01151-58 only come with two locks. The towers lock into bases and these bases are what the locks attach to. The intention is that you would use one lock base on each set of towers to…

view full answer...

Answer 2

Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions and profile so they are interchangeable.

view full answer...

Answer 3

You really could use either one of the 68" #Y01158 or 78" #Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars #Y01158. Obviously…

view full answer...

Answer 4

The Yakima BedRock HD Truck Bed Rack #Y01160-59 with the 78" crossbars is what Yakima test fit for your 2018 Ford F-150 and since the next size down is 10" less with the 68" HD Bars #Y01158 I am a little skeptical that the system would…

view full answer...

Answer 5

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 6

The Replacement Wrench Set #Y56FR contains the 10mm hex key, 6mm security hex key and 4mm security hex keys you need for your Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5855.

view full answer...

Answer 7

The Yakima OverHaul HD Adjustable Truck Bed Ladder Racks #Y01151-58 and #Y01151-59 are compatible with both your 2014 Toyota Tundra and your new 2023 GMC Sierra 2500. The only item your Tundra may have used different is the Toyota/Nissan Utility…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, the Westlake ST235/75-15 Off-Road Tire with Liger wheel part #LH46FR would be an exact match for what you have on your Forest River No Boundaries 19.5 and would work great. Trailer tires are not balanced like vehicle tires are. It doesn't…

view full answer...

Answer 11

Since the clamps for the Thule TracRac TracONE Ladder Rack #TH27000XTB-XK4B go over the bed rails of your 2021 Toyota Tacoma this means you'll need to go with a different ladder rack if you're also wanting to install a tonneau cover. For your…

view full answer...

Answer 12

The brake controller install harness part #3031-P would be the correct part number for your 2019 Toyota Tacoma if you have a Tekonsha controller. On your vehicle it will be located underneath and to left of the steering column, behind kick panel…

view full answer...

How to Upgrade from Yakima OutPost to Yakima OverHaul Truck Bed Ladder Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching