Replacement Wrench Set for Yakima OverHaul HD & Outpost HD Truck Bed Racks

Question

Question:

I lost the wrench set for my Yakima overhaul bed rack. Do you have replacement sets or can you tell me what size wrenches I need.

asked by: Al S

0

Expert Reply:

The Replacement Wrench Set # Y56FR contains the 10mm hex key, 6mm security hex key and 4mm security hex keys you need for your Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-5855.

expert reply by: Bud M

0

Answer 1

We have exactly what you need, though the wrench you mentioned won't work with your Yakima PowderHound 6. I checked directly with Yakima for you and verified the correct replacement hex wrench is the following: - Replacement 5/32" Hex Wrench…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 7

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 8

Hello Jorge, thanks for reaching out. The etrailer Electric Trailer Jack #e55ZV should work great on your 1979 Airstream Excella 500. It uses a standard bolt pattern (3" apart on center) so as long as you can confirm this matches the current…

view full answer...

Answer 9

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 10

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 11

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 12

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Replacement Wrench Set for Yakima OverHaul HD & Outpost HD Truck Bed Racks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching