Where is Brake Controller Install Connector for 2019 Toyota Tacoma

Updated 02/26/2019 | Published 02/25/2019

Question:

I have the brake and quick connector but can not find what it plugs into. Thanks

asked by: Todd S

Expert Reply:

The brake controller install harness part # 3031-P would be the correct part number for your 2019 Toyota Tacoma if you have a Tekonsha controller. On your vehicle it will be located underneath and to left of the steering column, behind kick panel taped to another harness near the emergency brake pedal. There will be a white 10-pin connector that mates with the one on the adapter.

Check out the picture I attached as well that shows where you'll find them.

The brake controller I recommend is the Prodigy P3 part # 90195 because this brake controller senses the amount of braking your tow vehicle is applying and puts a proportional amount of braking on the trailer's brakes. It also has a display that uses full words instead of codes that would have to be deciphered. It's our best selling brake controller because of how well it works, how reliable it is, and how easy it is to use.

expert reply by: Jameson C