Replacement Mounting Hardware for an Older Thule Flat Top Ski Carrier

Question

Question:

Hi I have an older thule flat top 6 ski rack and the mounts are broken. This is the part that attaches the rack to the cross bars What would the part number be for a new set of these? Thank you

asked by: Charlie K

0

Expert Reply:

It looks like you are going to need replacement hardware kit # 7533998. This kit fits all Thule snowsport carriers. It includes the brackets, hardware, and specialty tools for installation.

expert reply by: Michael H

0

click to enlarge

Answer 1

I was able to determine from your picture that you have the older style of Thule Flat Top TH725 which we have an adapter to allow the rack to fit into roof top channels with part #Xadapt2. This would be the adapter you'd need if your bars have…

view full answer...

Answer 2

Thanks for the picture! Yes, we do offer a longer screw it is the M6x50 Tamperproof Screw item #TH853526902. This Thule Replacement screw has a length of 50mm or 1.969 inches.

view full answer...

Answer 3

To mount your Thule Flat Top Ski Carrier 724, you will want to use the Thule Universal Mounting Kit #7533998. These mounting feet are designed to fit most factory and aftermarket crossbars. I spoke with my contact at Thule and she confirmed that…

view full answer...

Answer 4

The hardware you need for your first generation Thule Flat Top Ski Carrier (model number 725) is the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998, as you mentioned. You will also need four of the Replacement Round Nut for…

view full answer...

Answer 5

I went ahead and sent the attached images you have of your older Thule Ski carrier to my tech at Thule. Unfortunately, from the pictures alone, he could not identify the specific rack. However, he did say that the Mounting Kit for Thule Flat Top…

view full answer...

Answer 6

For the Thule Flat Top ski carrier 724 you can use mounting kit #7533998 to clamp the carrier to the Rhino-Rack Vortex crossbars. I would go with this kit because it is not limited to crossbars with the channel on top like the next option. The next…

view full answer...

Answer 7

First, we need to determine which Thule aero bars you have. The older bars were called Rapid Aero bars and were more symmetrical. The new bars are called AeroBlade bars and look more like a wing. I have included a 3/4 profile picture of the AeroBlade…

view full answer...

Answer 8

It looks like you have the older Thule Flat Top Ski Carrier and in which case you can purchase the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks part #7533998 to mount them onto factory aero crossbars. This kit will replace the…

view full answer...

Answer 9

Thank you for the photo of your Thule ski carrier that looks much like their SnowPack #TH7326. The ski carrier hardware shown in your photo appears to be for mounting it on Thule square crossbars. You may be able to mount this on your Vault rack…

view full answer...

Answer 10

I reached out to my contact at Thule and the discontinued Thule 575 Snowboard Carrier you have is confirmed to fit the Thule WingBar Evo Crossbars #TH711220 you mentioned without any adapters meaning you will not need the Mounting Kit for Thule Flat…

view full answer...

Answer 11

I would need to know which Thule ski rack you have. You may be able to use Universal Mounting Kit, #7533998. Depending on the age and model of the ski carrier you have, this kit may or may not work. Thule states that this kit is compatible with all…

view full answer...

Answer 12

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

view full answer...

Replacement Mounting Hardware for an Older Thule Flat Top Ski Carrier

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching