Solution for Replacement Hub and Drum for Dexter 008-480-05

Updated 09/14/2022 | Published 09/13/2022

Products Featured in This Question

Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2

(672)

$284.70

Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs

(1692)

$214.36

Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased

(1126)

$297.35

Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs

(263)

$250.57

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(657)

$12.64

Question:

Will this be direct replacement for Dexter # 008-480-05? I understand they do not manufacture this hub/drum anymore.

asked by: Jim

Helpful Expert Reply:

The Dexter 008-480-05 is specifically designed to fit AL-KO axles. Unfortunately, the # 8-407-5UC3-EZ will not fit AL-KO axles. Since these axles are no longer made replacement parts are not available. The best solution is to replace your 4,400 lb axle with a conventional axle.

The closest thing in capacity will be a 5,200 lb axle like the # e45GR which measures 86-1/2" long. You will need your hub face to hub face measurement to find the correct replacement. If the spring seat measurement doesn't match what you currently have you can cut off the spring seats and weld on the # TRSS300.

For a hub and drum assembly you can use the # 8-201-9UC3-EZ which will match your current bolt pattern. You would also need new brakes like the # 23-105-106.

I have attached some installation videos along with a helpful video on how to measure your axle for your reference.