Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Old incandescent bulbs never seem to last long and pull too much power. This Miro-Flex LED clearance or side marker light uses 4 LEDs that shine bright while drawing only 0.047 amps at 12.8V. The LEDs last up to 50 times longer than traditional bulbs and never need replacement. With no brittle filaments to break, you get clear, reliable light every time you hit the road.
Moisture and corrosion can quickly ruin trailer lights, but this one is fully sealed against both. The housing and lens are sonically sealed into a single waterproof unit, making it submersible. Whether you’re driving through rain or backing into the water, the diodes and circuit board stay completely protected so the light keeps working like new.
A good trailer light should look sharp as well as perform well. This 5-3/4" long by 1-9/16" wide oval light features a Miro-Flex faceted reflector that boosts brightness and gives it a modern look. The snap-on chrome bezel finishes it off neatly, adding a polished touch while the red lens covers bright white LEDs for a crisp glow.
No complicated wiring or custom brackets needed here. This light mounts directly to any flat surface (hardware not included) and uses a basic 2-wire design—one power lead and one ground wire. With 4-5/8" center-to-center mounting holes and a slim 3/4" thick profile, installation is quick and tidy for a clean, professional finish.
Visibility matters for safety, especially at night or in low-light conditions. This light is P2 rated, producing a 45-degree beam on each side of center for a total of 90 degrees of bright coverage. It works perfectly as either a clearance light or a side marker light when mounted correctly, ensuring your trailer stands out when it counts most.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to show you Optronics Sealed Miro Flex Star LED Side Marker and Clearance Light part number MCL19RB. The lens of this light is sealed and waterproofed against the housing. Inside are 4 red LEDs that draw a total of .080 amps at 12.8 volts. The LEDs inside are also covered by a lifetime warranty from Optronics. The light utilizes a 2 wire design meaning one wire will act as your electrical ground and the other wire will make your power connection. There is also a snap on plastic chrome cover to dress up the light. Next we are going to hook the light up to a power supply so you can see how bright the light is. We will connect one wire to ground and the other wire to power. Next we will turn off the overhead lights so you can see how bright the light is. And that does it for Optronics Sealed Miro Flex Star LED Side Marker and Clearance Light part number MCL19RB.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Look Great!
Vary good quality
Very pleased with this product!
LED is the best way to go. Awesome
These lights arre much better then the original equipent. really set off the camper. Thanks for a great product.
Dve
Service was fast, efficient and right on. Product was exactly as depicted. The customer rep was among the most helpful and accommodating I’ve dealt with. He certainly went the extra mile to find the part I needed. This is by far one of the best companies in the business I’ve dealt with,
Thanks so much.
The lights look ok, but I haven't gotten them installed yet. My main complaint is the packaging, because everything I ordered was thrown loose into one box. You need to do better to ensure nothing is damaged during shipping.
Service was excelant and the light was just wanted
great marker lights and easy to install great price
As described, excellent customer serviceand all my parts arrived in 2 days. Etrailer.com will get all my future business.
Exact replacement for my trailer. Much cheaper then buying at local trailer shop.
I had previously ordered some of these in amber for a project and loved them so I came back for more. They are easy to wire in and install and look great. About the only thing I wish were different is the back side where the wires come out has a plastic protrusion about 3/8" by 1/2", which I understand, but requires drilling out the area for the mount. Wish that were flat but still, I'd buy more in a heartbeat.
My first order, etrailer has great communications, let me know what was going on with order regularly
These are really nice marker lights, they look good and burn bright at a very reasonable price. They were delivered in two days. I installed on my 2014 Entegra Anthem motor home. I couldn't find the originals, but these are much better.
Fast Service/Shipping Awesome Product Looks Great Easy Installation 5 Stars.
parts purchased from etrailer.com for my homemade cargo trailer
great lights for my Harley iam using them to add more brake lights mounted on filler strips between the fender and the saddle bags
Using the lights as aux brake lights, no problems, work great.
One of my favorite products to use as side marker/clearance lights for my teardrop campers at Boondock Campers LLC. Very snazzy appearance. Easy to wire. Sealed design. Chrome bezel holds up to use and abuse. Only complaint is that the rear of the light is not flat. The wires protrude through a strange figure 8-shaped plastic grommet, which requires me to drill a 11/16-inch hole in order to flush-mount the lights, which takes longer than drilling a smaller hole.
Terrific customer support. Items were perfect for the job.
what was needed
I received the lights and tested
them; they worked fine. They are destined to be used on a car, not a
trailer. Side marker lights for cars/trucks are rare now because they are
incorporated into the front and rear light assemblies and rap around the
vehicle. The lights I ordered from you are the only ones I could find that
had a hole-mount pattern wide enough to clear the metal cutouts, under the
old lights, in the fenders of my car. I'm glad you have a huge selection to
choose from. I'm not sure when I'll get around to installing them. The car
is undergoing a restoration for the third time. All I know is the next time
I remove the stock side markers, they will shatter. Few trim parts are
available for this car these days and nylon snap-in mounting tabs dry rot
and break after a couple of decades. I bought this little car new 26 years
ago and took it around the world with me before I retired from the Air
Force.
I attached a picture of it from the last touchups 7 years ago. It won't quit
running so I keep giving it new birthdays. This little rat car has become a
part of my DNA.
1991 GEO Tracker 4x4. Original owner.
This item was an exact replacement for a marker light on my T@B320S trailer.. When we pulled the old light, we realized that the wiring went directly through the outside of the trailer into an inaccessible area inside the trailer. So we had to cut the old wires and rewire with wire nuts. Not sure how weatherproof this is, but it was the only way to do it. The light itself worked fine.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jmorris
6/24/2018
Look and work great.