Weight Distribution Hitch For My 2022 Ram 2500Towing A 3,500 Pound Horse Trailer
Updated 09/02/2022 | Published 09/01/2022
Products Featured in This Question
Question:
I have a 2022 Ram 3500 with a 6.5’ bed and a slide in camper. The camper overhangs about 14” past the center of the ball on my 6” hitch. What do I need for an extension and weight distribution in order to also tow my 2 horse trailer?
asked by: Lance B
Expert Reply:
The Hitch Extender # HE12 will extend your trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles. The extender has a solid steel shank and has a black powder coat that will help resist rust and corrosion. It will extend out 14 inches.
The weight capacity when using a weight distribution hitch will be up to 7,000 pounds and the tongue weight will be up to 700 pounds. Using this extender will reduce your hitch's overall capacity by 1/3.
The Fastway e2 Weight Distribution # FA92-00-0600 will work with a tongue weight between 250 pounds to 600 pounds. With your trailer weighting about 4,400 pounds after loading up the two horses you will be right in the middle which will work for you. When choosing a weight distribution hitch you will need to select one that is as close to your loaded tongue weight as possible. Having a lower or higher tongue weight then what is recommended will cause my issues then not having a distribution hitch at all.
The 2-5/16 inch hitch ball # EQ91-00-6100 and the 1-7/8 inch thin walled socket # EQ70-00-4800 are sold separately.
I attached a review video link below.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Which Direction Does The TowSmart Hitch Receiver Reducer Sleeve TS75FR Go?
- Shop: Base Plate for Tow Bar
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: tow bar base plate
- Search Results: stores on car tow bar
- Search Results: 5/8 pin
- Search Results: 2 inch hitch heavy duty receiver hitch
- Search Results: trailer lights
- Search Results: black tank flush valve
- Shop: Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 6" Drop - 7,500 lbs
- Q&A: Comparing Etrailer 6" Drop Ball Mount To Curt 6" Drop Ball Mount For Lifted Truck
- Shop: Trailer Hitch Extender for 2" Hitch Receivers - 18" Long
- Shop: Camco Dual Flush Pro for Rinsing RV Holding Tanks and Sewer Hoses
- Shop: BTBRV Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" - Red
- Shop: TowSmart Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Shop: Hitch Pin and Clip For 2-1/2" and 3" Hitches - 5/8" Diameter x 4" Span
- Shop: Trailer Hitch
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
on Hitch Adapter
