What Size Grease Seal And Dust Cap is Needed on a 3,500 Lbs. Axle With L44649 Outer Bearing
Published 06/07/2010
Products Featured in This Question
Question:
If i have an L44649 outer bearing what size seal should I use? it is a 3500lb axle. also what size dust cap do i need?
asked by: Matt M
Expert Reply:
The size seal you will need will depend on the part number of your inner bearing.
If the outer bearing part number is L44649 and the inner bearing part number is also L44649, then you will use a TruRyde Seals, # RG06-020.
If the outer bearing part number is L44649 and the inner bearing part number is L68149, then it will be TruRyde Seals, # RG06-050.
The size grease cap you will need is 1.986 inches.
For the standard spindle you would use the TruRyde Grease Caps, # RG04-020.
If you have a E-Z Lube spindle, with a grease fitting in the end of the spindle, you would use the TruRyde Grease Caps, # RG04-040.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Search Results: trailer bearings races seals caps
- Shop: EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Search Results: trailer bearing kit
- Search Results: bk2 100 bearing kit
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: electric brake hubs
- Search Results: ez lube grease cap trailer bearings races seals caps
- Search Results: axle nut retainer
- Search Results: axle cotter pin
- Q&A: Replacement Bearing Kit and Grease Cap for Dexter Trailer Hub 8-248
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: In-Depth Review of the Spindle Nut for Axles with 7/8"
- Shop: Replacement Nut Retainer for 6-191 Jam Nut
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Recommended Grease Cap for Lippert 4,400 Pound Trailer Axle
- Q&A: Ways To Determine Bearing Sizes Used On a Dexter 3500LB Trailer Axle
- Q&A: Can Marine Wheel Bearing Grease Be Used In a Utility Trailer
- Q&A: Lug Nuts For Hub on Dexter 3,500 lb Axle
- Q&A: Brake Recommendation for Big Tex 35SA-10 Trailer with 3500 LB Axles
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: In-Depth Review of the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Video: Feature Breakdown: Grease Seals (pair)
- Video: Review of the Removable Wheel for Trailer Valet JXS Trailer Jacks
- Video: A Closer Look at the Removable 6" Wheel for Dutton-Lainson A-Frame Trailer Jacks