Recommended Additional Solar Panel For A 2022 Forest River Flagstaff Micro Lift Travel Trailer

Question

Question:

Our 2003 Flagstaff Micro Lite already has a 30 amp charge controller built in along with a 190W roof panel and a 1000W inverter. I want to add this as a lightweight add on panel that I can position away from the trailer. Exactly which cables/adaptors do I need to bring it all together? Thanks!

asked by: Mark

0

Expert Reply:

All of the cables and connectors to connect the:

-Go Power DuraLite Portable Solar Panel Expansion # GP76FR are included in the kit.

This kit includes quick connectors, ring terminals, a digital solar controller, battery clamps, XLR-Style solar plug, and a canvas kit bag.

This kit will work most portable power stations, and will also work with pre-wired Furrion solar setups as well.

Additionally, since it uses its own 30 amp controller it won't be able to be tied into your existing controller. This system will still work for you, you'll just have to use their controller.

expert reply by: Bryce D

0

Answer 1

You have a couple options, but I cannot recommend you modify the mounting bracket of your air spring kit that you have installed. Instead the easiest thing to do would be to use a universal rail kit like part #RP30035. Universal kits typically fit…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 9

Hey Bob, congrats on a setting up a new camper! Out of all of those options you'll also need to consider daily driving comfort unless that camper is a permanent addition to your truck bed. Listed below are a brief breakdown of each and a…

view full answer...

Answer 10

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Answer 11

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 12

Hey Brent, yes the Firestone Ride Rite Air Bag and Compressor kit part #F59XV is a fit for your 2026 Toyota Tundra. This will do an excellent job giving you the additional suspension support you are looking for that will make a big difference with…

view full answer...

Recommended Additional Solar Panel For A 2022 Forest River Flagstaff Micro Lift Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching